Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
In the assembly of this board, there're several axial through hole resistors, radial aluminium electrolytic capacitor, and also one axial through hole diode. Some through hole connector for example ID...
The assembly was perfect, I've got no complain. Only very weird that among 5 boards, there's actually 1 board that has microcontroller can't be programmed, it's not responding when I do it like usual ...
The assembly for this small board was perfect, I've got no complain. Actually this is my first time to have a 8p8c modular connector on my board design, the connector for RJ-45 cable. And I just know ...
This is just standard interface board for RS-485 communication via 8p8c modular connector. I was actually making this prototype to test if it's going to work when the channel being parallel, also I wa...
This is a general purpose microcontroller board with a lot of connector that interface the peripheral of the device to outside world (external boards). On this board there's a USB micro B connector th...
It's the second revision of my microcontroller board that I used on the company where I work. Apparently, the downside of the device was it doesn't have pin for external battery to back up the interna...
It's a external small board contain eeprom and flash memory, mean to connect to a controller board that doesn't have internal eeprom, or need more flash to store data.
It's a standard single layer board with some passive components and connectors (hence the name interface board). I'm not sure the different between surface finish with silver or gold (enig), but so fa...
This is the third revision of my general purpose microcontroller board for use in the lab product in the company where I work. Actually no significant change from the second revision, only some parts ...
It's a small board for interfacing purpose. It convert uart signal from mcu to rs-485 using a transceiver from maxim integrated. There's a pin to control the direction (switch) between sending or rece...
The assembled board was perfect, and I have no complain about it. For 0805 SMD LED, actually everytime when the assembly person sent me an e-mail to confirm the correctness of the assembly process, I ...
The different in quality of the assembled board, that I experienced was actually the bond of the copper trace and also solder pad to the board FR-4 material are quite strong. Many times in my experien...
Eventhough the board was just small 36mm x 25mm, the assembled quality of the board was same good quality.
The component outsourcing was good, and the quality of the parts are guaranteed as it come from trusted world-wide supplier Digikey. The assembled parts were good not only for SMT, but also the throug...
1 2 3