Bottom
Top
Description
Automatic irrigation controller
### DESCRIPTION
Automatic controller for watering indoor plants
The controller is made on Atmega8, it is possible to water plants on days, weeks and months. You can set a specific date for irrigation. To connect to a network ~220V.
Code
https://1drv.ms/u/s!Ak6JSYsK1EjLjp9n7sfLxn94C7rY5w
Jan 09,2019
1,951 views
end-flag
Automatic irrigation controller
2 Layers PCB 53 x 71.3 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
1951
1
2
Published: Jan 09,2019
Download Gerber file 20
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(2)
- Likes(1)
More by Engineer
You may also like
-
How to measure weight with Load Cell and HX711
251 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
406 0 0 -
RGB LED Matrix input module for the Framework Laptop 16
685 0 2 -
-
Can. Works simply. The basis of the project is Atmega8, DS1307 is connected to it. Just connected to the microcontroller transistor IRL6372, its task is simply to turn on and off the pump for irrigation. When you first start you need to set the time. Then set the pump operating time in increments of 10 seconds. In the menu item "watering time" set the time of irrigation, and set how many times a week or month will be included watering. This is already a working project: https://www.drive2.ru/b/521584402912772967/