DC-DC chip TPS61088RHLR

This module explains:

Input voltage 2.7-9v, no reverse connection protection, pay attention to input polarity.

Lead out the EN interface, floating = boost operation, ground = shutdown.

Lead out two voltage short-circuit points, select the corresponding short-circuit point link, the module outputs the corresponding voltage. (Only one of the points can be short-circuited. Cannot be short-circuited at the same time)

In the boost module, the input is always lower than the output. note. The total output power is controlled within 25W.

TPS61088 is a high power density fully integrated boost converter with an 11mΩ power switch and a 13mΩ rectifier switch, which can provide an efficient and small size solution for portable systems.

The TPS61088 has a wide input voltage range of 2.7V to 12V, which can support applications using single-cell or two-cell lithium batteries. The device has a 10A switching current capability and can provide an output voltage up to 12.6V.