Roland Lautensack
GERMANY • + Follow
Description
G-EDM - Low budget DIY Wire EDM machine——sensorboard
This page only includes sensorboard, if you need the other two boards, please check the links below:
Oct 02,2024
564 views
end-flag
G-EDM - Low budget DIY Wire EDM machine——sensorboard
564
1
5
Published: Oct 02,2024
BOM(Bill of materials)
Centroid file
PCBWay Donate 10% cost To Author
File Last Updated: 2024/10/29 (GMT+8)
File update record
2024-10-2914:02:06
Centroid file is updated.
2024-10-2913:56:49
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial-NoDerivs (CC BY-NC-ND)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
- Comments(5)
- Likes(1)
More by Roland Lautensack
-
G-EDM EVOIII board - Low budget DIY Wire EDM machine
G-EDM EVOIIIThe new EVOIII board provides a single PCB containing the pulse stage and the sensing st...
-
G-EDM - Low budget DIY Wire EDM machine——sensorboard
This page only includes sensorboard, if you need the other two boards, please check the links below:...
-
G-EDM - Low budget DIY Wire EDM machine——pulseboard
Note from PCBWay: This page only includes pulseboard, if you need the other two boards, please check...
-
G-EDM - Low budget DIY Wire EDM machine——motionboard
Note from PCBWay: This page only includes the motionboard. To build the G-EDM it also requires the p...
You may also like
-
Modifying a Hotplate to a Reflow Solder Station
202 0 2 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
149 0 1 -
-
-
V2 Commodore AMIGA USB-C Power Sink Delivery High Efficiency Supply Triple Output 5V ±12V OLED display ATARI compatible shark 100W
412 4 1 -
How to measure weight with Load Cell and HX711
437 0 3 -
-
Instrumentation Input, high impedance with 16 bit 1MSPS ADC for SPI
543 0 0
Yes. The board is ok to use.
Thanks for your quickly reply and confirmation. We got it.
No problem. If there are any question by a customer you can redirect them to our discord: https://discord.gg/9cTsyDkEbe
Many thanks. We got it.