|
KiCADKicad
|
ZX UNO 1010 (rev.A1)
ZX Spectrum FPGA clone. This is 10x10cm PCB variant of ZX-Uno project.
Tech specs:
- Fully compatible with ZX Uno v4.1 and ZX-Uno VGA 2M
- XC6SLX9 FPGA
- 2Mb SRAM memory
- VGA video output
- PAL/NTSC video + audio output via 3.5 jack connector (raspberry-pi compatible pinout)
- PS/2 keyboard and mouse ports
- 2xDB-9 ports for Atari-compatible joysticks
- SD/microSD card slot
- Tape input via Bluetooth module or ordinary 3.5 jack
- MIDI
- WiFi module
- MicroUSB power supply
- Board optimized for G738 and G706 cases
More information: https://github.com/UzixLS/zxuno1010-board
ZX UNO 1010 (rev.A1)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(2)
- Likes(8)
More by Eugene Petrovich Lozovoy
-
Kharon-386 - tiny DIY computer (main board)
10x10cm IBM PC compatible machine with 386 CPU, integrated VGA and sound.Tech specs* M6117D System-O...
-
Kharon-386 - tiny DIY computer (front/back panel)
NOTE: This is front/back panel onlyFor main board and more info seehttps://www.pcbway.com/project/sh...
-
Kharon-386 - tiny DIY computer (video&sound board)
NOTE: This is top board onlyFor main board and more info seehttps://www.pcbway.com/project/shareproj...
-
ZX-MultiSound (rev.A1)
Sound card for ZX Spectrum (NemoBus).Tech specs:* TurboSound FM (2xYM2203)* General Sound (12MHz, 10...
-
MIST FPGA 1010 (rev.A2)
FPGA board implementing old 8- and 16-bit computers such as Amiga, Atari ST, Commodore 64, ZX Spectr...
-
Sizif-128 (rev.C1)
Easy-to-build minimalistic ZX Spectrum clone.Specifications:CPLD EPM7128SLC84 (128 macrocells)Z80 3....
-
Sizif-XXS Zero (rev.A)
Smallest FPGA-based ZX Spectrum clone with real Z80.Tech specs:65x30mm PCB - Zero-like dimensionsPS/...
-
ZX UNO 1010 (rev.A1)
ZX Spectrum FPGA clone. This is 10x10cm PCB variant of ZX-Uno project.Tech specs:- Fully compatible ...
-
Sizif-512 (rev.E1)
Another CPLD-based ZX Spectrum clone for 48K rubber case with some sweet features.Tech specs:* Half-...
-
-
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
159 1 1 -
-
