PCB Prototype the Easy Way

Full feature custom PCB prototype service.

Help Center
Sending a message
9:00 - 23:00, Mon.- Sun. (GMT+8)
Service hotlines
+86 571 8531 7532

9:00 - 18:00, Mon.- Fri. (GMT+8)

9:00 - 12:00, Sat. (GMT+8)

(Except Chinese public holidays)

Surface Finishing

Bead blast + Anodized color

Bead blast + Anodized color can form an oxide film on the blasted metal surface and give it a customized color effect by means of dye or electrolytic coloring.

Get a quote

Introduction to Bead blast + Anodized color

Bead blast + Anodized color
Bead blast + Anodized color
Description

Anodizing creates a corrosion-resistant finish. Parts can be anodized in different colors—clear, black, red, and gold are most common—and is usually associated with aluminum. And with bead blast, the part surface is left with a smooth, matte appearance.(Note: 1.There will be a certain color difference between the actual color after anodizing and the above color board. 2.Rack marks are inherent to the anodizing process. When engineering a part that will be anodized, you'd better identify where the part will be racked. Typically, the racking location is chosen to minimize the visibility of the mark after the part is assembled.)

Colors

Technical Properties

Applicable Sharp edges and burrs Premium appearance availability Tolerances
Metals Removed Yes Met after surface finish

Applicable Materials

Example of a Bead blast + Anodized color Part

Bead blast + Anodized color
Bead blast + Anodized color