Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
A low profile break-out board to get signals from a 6522 PIO chip in a tight enclosure. Specifically made for a track display project.
A low profile break-out board to get signals from a 6116/2116 memory chip in a tight enclosure.
A small board to hold the LEDs for the Commodore 1581 disk drive.
A clone of the 1581 disk drive for the Commodore 64.
Prototype board with edge connectors.
A prototype board with only holes. Made to be cut into whatever size you need.
A small adapter board which will read the keyboard matrix of a C64 (or any other 8x8 matrix keyboard) and send the result via serial connection.
A low profile break-out board to get signals from a 6522 PIO chip in a tight enclosure.
An adapter so a regular PC disk drive can be used on the Commodore 1581 clone board.
A board to place a PicoPSU on and then placed in a Commodore 1571 floppy disk drive to replace the bit original power supply.
I wanted a small color LCD to replace an OLED display and this seemed good.
Prototype board with edge connectors.
Connect three MSGEQ7 equalizer chips with slightly different clock frequencies and you can have a 21 band equalizer.
This is a adapter to use my C64 RGB gaming keyboard with a C128D which has a separate keyboard. This board conects to the external keyboard connector and contains the receiver board which is normally ...
1 2 3 4 5 6 7 8 9