this is a simple pcb marketing
replacement parts unavailable manufacturer
After testing various and expensive 2-stroke dashboards with reliability problems, I discovered the Arduino world (I was a total noob). I decided to make my own dashboard collecting all the data I nee...
My First project : need a flash when my battery's under 30%.
LFO module for modular synth sytem. this LFO has 2 signals output (square and triangle) and 4 ranges of frequency. Powered with +12/-12V it could be integrated easily in a eurorack system.
This is the portable remake of a game of the 80's SIMON, repeat a sequence of light and sounds that is increasing by one each turn...
because a personal need, I build a tracking system with gsm and gps to locate my dog
A simple monochrome led cube (64 leds), controlled by an arduino nano, very simple wiring, 5 hours to assemble Material : 1 arduino (nano or uno etc...) 1 pcb (3pcb.com) 16 resistors 100ohms 64...
The aim is to achieve a miniature support, to drive an LED.
En Fran?ais plus bas (French Language follows) This is a rather dense PCB, 3cm x 3 cm, dual layer, which holds SMCs, one of them is an LGA with 14 pads as thin as 0.55mm, pitch 0.80mm. There is also...
Plaque permettant le masquage et l'aération d'une table de mixage Innovason. La difficulté est d'avoir une plaque compatible Eurorack et une bonne aération. Percer une dizaine de plaques même en alu...
This displayer module will be autonomous and connected with others modules.
Motherboard for powering case.
This is a bass fuzz pedal gor guitar of bass. It's a clone of the famous Woolly Mammoth.
This is my first electronics project, I wanted to do an ampli Class A fairly simple and efficient , I found Nelson Pass DIY plans , and I wanted good quality PCB .Pcbway supply a hight quality pcb wit...
HANSY : Hybrid Analog Numeric Synthesizer