ok! good receive. thank you.
PCB for making dust sensor. The PCB is clean and the finish is high. It is too good to be made in white because there is no extra cost.
3D printer connector project. It is a pcb for cleaning the wires in the head. Heater / sensor / fan / 12v / Z-limit can be installed. I installed a led to check the operation of the heater. 5v-12v...
The temperature sensor takes the reading on a predefined time and the controller goes to sleep after the reading, this makes the board run on CR2032 for more than year. All data is transmitted to the ...
This is my second order to PCBWay. The PCB's delived have satified me as I expected through my experience of the previous order. As a sub-board for use in my on-going high-end DIY integrated amplifi...
There was not metal mask data.
Good work order process is shown, also satisfies the quality.
Good quality and fast delivery. Much better than other overpriced manufacturers. Trustworthy.
It is a connector to RAMPS1.4 like 3D printer connector. Since the space in the RAMPS is narrow, it is arranged using the unused Z-axis. For simplicity, some are connected by wires.
1/35 scale RC Tank MainBoard
Creating a dynamic nfc tag for transfer of sensor data.
This is a PCB for use in the RCA input connector module of my DIY audio amplifier.
nice quality.
1 ... 16 17 18 19 20 21 22 23 24 25 26