BLE Buttons & iPad charger

This is 3 tactile switches that work with an Apple iPad in accessibility mode. The switches interact using Bluetooth Low Energy. The Nordic nRF52 BLE radio is powered with a 12V, 2.5A wall adapter, regulated to 3.3V, and also has a Auxiliary RCR123A back up battery in case of power loss. The circuit has a onboard regulator and charge IC and USB A output to connect an Apple Lightning Connector for charging an iPad. PCB way has always been on the job, quick to respond, excellent coustomer service all hours of the day, I can't believe it!! The boards are always high quality and their engineering team always has an eye for quality and not afraid to send an email if there are any questions. Always a success with PCB Way.


Mar 04,2020
1,123 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Paul G View Profile
34posts 0followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Designed for L-band satellite reception using the designated FR-4 from PCBWay. Manufactured antenna nicely matches the simulated performance!
    Very nicely done - A++
    The board arrived within the scheduled time. The surface finish and printing were smooth. The vacuum packaging was also strong.
    Great quality. No chips or cracks, only a few visible layer waviness. This could be sanded and polished away if need be. No complaints.
    Excellent from start to finish
    Surprisingly the silkscreen was very good and defined for my tiny text. The PCB feels very nice and the milled edges are smooth and clean. The copper pour and routing are all accurate (though I used 1...
    Came out exactly as I had hoped. Very minimal layer lines are visible in some places. They could be polished if need be. If you order these in clear resin, do not select tapped threads. I’m going to h...
    I used PCBWay to create a PCB for an environmental monitoring project with an ESP32. The entire process, from uploading files to setting up production options, was straightforward and user-friendly. ...
    SHOW ME MORE