Dotmatix Small Radio Module PCB

This was a 1" by 2" 4 layer PCB with 0.2mm vias which put the price up a fair bit but the boards were perfect. Next time I will try to use 0.3mm vias. I did not realise the Gerbers had to be in RS-274X format until my X2 format Gerbers failed to pass review. It took me a while to track down the correct output options in Autodesk Eagle. I would suggest to PCBWay that they update their software to accept X2 format Gerbers.

Apr 26,2018
252 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
David Griffiths View Profile
7posts 0followers 0following
  • Comments(1)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Very nice quality and speed, the delivery time to Mexico was on a couple of weeks, very fast and very cheap, all the process is very simple and the support is great.
    the parts arrived in good time and the package was very good. The finish of the pieces is excellent, only a detail is missing in one of the machined holes. The hole at the end of the part should go al...
    This tester can verify either a 555 Timer or a 741 Op-Amp is functioning by put them in an astable multivibrator circuit before using them in a circuit. This tester also provides split rail power (+v ...
    Silkscreen is clear and readable, everything seems to have been manufactured to the design, looks really nice with the red solder mask, good work!
    there is a problem on the PCB, there is no hole in the layer (GML), I showed it in the photo. I checked my ZIP date and it is ok. I need new 1500 PCBs quickly
    Again, I am very happy with the appearance of the boards, The red solder mask looks great with the white silkscreen text as you can see in the photos. There were no sharp edges left behind from the ta...
    I would like to thank pcbway company. It was a very good pressure. If you want to have this type of electronic card made, do not give up on this company. My project is about iot remote management syst...
    We wanted one off PINK circuit boards for our Pixel light controllers. working with a known vendor, they shared their Gerber files with us so we could have them custom made. This adventure has been ...
    SHOW ME MORE