Dual H-Bridge Controller

This is a simple dual H-Bridge motor controller prototype board. It is meant to be used to give new life to an old toy car, belonging to a friend's 7-year-old son. The Toy used to be radio-controlled, one of those ultra-cheap component mass-produced ones, that doesn't last more than a few weeks before the electronics give out. The plan is to replace all the electronics with better equipment entirely and add some educational value in teaching the boy how to code. After initial testing, the PCB works quite well, with the only issue being a bit of heat generated on the supply tracks. This is however not a big problem, as we are speaking of about 300mA to 450mA of current running through those tracks constantly. The transistors stay nice and cool though. I will address the heating issue in the production PCB. The manufactured PCB is of very high quality, and definitely completely accurate to my design. PCBWay did a very good job on this one. Thank you