FluidNC Laser Controller

I have a laser engraver which uses the FluidNC control system. My initial prototype which was built on DotBoard with point to point wiring works well, but as the unit vibrates from the stepper motors, this is not ideal. After searching for a ready designed PCB, and failing, I created a new layout to my specifications which cover X, Y and Z Axis, with a Laser port, and Air Assist port. The unit also has the option to use either TMC2209 or A4988 speedstick drivers, as well as the usual limit switches. As always, the communication from Riley was brilliant (sorry for the numerous cancels and uploads!), and the unit functioned first time with no modifications or tweaks required. Once again, I highly recommend PCBWay for any PCB manufacturing requirements.