Procedure PI

Add on controller card for the raspberry pi. Tightest specs to date of any board I have made. The production was 100% perfect and arrived way faster then I expected as it got here in less then a week. The stencil is way better then I expected. This this is made for production and I'm just using it for 1 or 2 boards. Looked around and others are asking over $175 USD for the same thing and I paid less then $45 USD with shipping. I've examined the board with a magnifying glass and it is 100% perfect with better tolerances then I expected for $5 + Shipping Next board is going to be even more tight and going to use either 5mil/5mil or 4 layer on it for a BGA chip. Can't wait to see it completed.



Aug 30,2017
1,438 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Joseph G Roberts View Profile
2posts 3followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Designed for L-band satellite reception using the designated FR-4 from PCBWay. Manufactured antenna nicely matches the simulated performance!
    Very nicely done - A++
    The board arrived within the scheduled time. The surface finish and printing were smooth. The vacuum packaging was also strong.
    Great quality. No chips or cracks, only a few visible layer waviness. This could be sanded and polished away if need be. No complaints.
    Excellent from start to finish
    Surprisingly the silkscreen was very good and defined for my tiny text. The PCB feels very nice and the milled edges are smooth and clean. The copper pour and routing are all accurate (though I used 1...
    Came out exactly as I had hoped. Very minimal layer lines are visible in some places. They could be polished if need be. If you order these in clear resin, do not select tapped threads. I’m going to h...
    I used PCBWay to create a PCB for an environmental monitoring project with an ESP32. The entire process, from uploading files to setting up production options, was straightforward and user-friendly. ...
    SHOW ME MORE