Filippo Ceraulo
ITALY • + Follow
Description
iSpndel_4.0
### DESCRIPTION
PCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)
https://github.com/universam1/iSpindel/blob/master/docs/README_en.md
### TECHNICAL DETAILS / COMPONENTS
- - 1 Plastic cylinder
- ( http://www.geoshop.lt/index.php?route=product/product&path=20_26&product_id=285#.WoBTg-jOXIU )
- - 1 resistor 4k7ohm
- - 1 resistor 220kohm
- - 1 diode BAT43
- - 1 Wemos D1 mini v3 (compatible asl v2 or v1 model, but usb is close with the pcb)
- - 1 Gy-521 Gyro & Acceleration Sensor (MPU-6050
- - 1 Temperature Sensor (DS18B20)
- - 1 TP4056 Lipo Charger micro USB 6 pin with protection circuit
- - 1 microswitch SK12D07VG3
- ( https://www.pcbway.com/project/shareproject/publish.aspx?orderid=438558 )
### LEARN / TOPIC / BUILD INSTRUCTIONS
For assembly see silkscreen on both layer.
Please mount only male pins, while to fix the battery need solder on short iron on both poles
Assembly instructions: https://www.dropbox.com/s/5lwl436oonqsmnx/iSpindel%20PCB_assembly.pdf?dl=0
Cheers!!!
CherryPhilip
Mar 05,2019
46,193 views
end-flag
iSpndel_4.0
2 Layers PCB 30.7 x 123.24 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
46193
43
50
7.92 (28)
Published: Mar 05,2019
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/07/11 (GMT+8)
File update record
2024-07-1117:35:27
Parts List (BOM) is updated.
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-NonCommercial (CC BY-NC)
License.
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor
BUY NOW
Raspberry Pi 5 7 Inch Touch Screen IPS 1024x600 HD LCD HDMI-compatible Display for RPI 4B 3B+ OPI 5 AIDA64 PC Secondary Screen（Without Speaker）
BUY NOW
Topic
- Comments(50)
- Likes(43)
View More
VOTING
28 votes
- 28 USER VOTES
7.92
- YOUR VOTE 0.00 0.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
7design
-
7usability
-
7creativity
-
7content
7.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
1design
-
3usability
-
5creativity
-
8content
4.25
-
1design
-
2usability
-
3creativity
-
3content
2.25
-
1design
-
2usability
-
3creativity
-
4content
2.50
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
9usability
-
9creativity
-
9content
9.25
-
5design
-
4usability
-
3creativity
-
1content
3.25
-
1design
-
10usability
-
10creativity
-
10content
7.75
-
2design
-
2usability
-
6creativity
-
8content
4.50
-
8design
-
8usability
-
8creativity
-
8content
8.00
-
1design
-
2usability
-
3creativity
-
5content
2.75
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
8design
-
8usability
-
8creativity
-
8content
8.00
-
6design
-
6usability
-
7creativity
-
8content
6.75
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
1design
-
10usability
-
10creativity
-
10content
7.75
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
9design
-
10usability
-
9creativity
-
9content
9.25
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
5design
-
10usability
-
10creativity
-
10content
8.75
-
10design
-
9usability
-
10creativity
-
10content
9.75
-
10design
-
10usability
-
10creativity
-
10content
10.00
-
10design
-
10usability
-
10creativity
-
10content
10.00
More by Filippo Ceraulo
-
iSpndel_4.0
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
New_ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
BrewPiLess_2.1 - Wemos
### DESCRIPTIONBoard compatible for BrewPiLess controller.You can use Wemos D1mini or LoLin V3 (ver0...
-
New iSpindel PCB 2.1
### DESCRIPTION### TECHNICAL DETAILS / COMPONENTS### LEARN / TOPIC / BUILD INSTRUCTIONS
-
W10971ASK36_iSpindel_v2.6
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
New iSpindel PCB 3.1 (new TP4056 module)
### DESCRIPTION### TECHNICAL DETAILS / COMPONENTS### LEARN / TOPIC / BUILD INSTRUCTIONS
-
iSpindel PCB 4.1 Original
The original ISPINDEL PCB is CHERRYPHILIPYou can find instructions, video tutorials on youtube (key ...
-
iSpndel_4.0
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
New_ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
BrewPiLess_2.1 - Wemos
### DESCRIPTIONBoard compatible for BrewPiLess controller.You can use Wemos D1mini or LoLin V3 (ver0...
-
New iSpindel PCB 2.1
### DESCRIPTION### TECHNICAL DETAILS / COMPONENTS### LEARN / TOPIC / BUILD INSTRUCTIONS
-
W10971ASK36_iSpindel_v2.6
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
New iSpindel PCB 3.1 (new TP4056 module)
### DESCRIPTION### TECHNICAL DETAILS / COMPONENTS### LEARN / TOPIC / BUILD INSTRUCTIONS
-
iSpindel PCB 4.1 Original
The original ISPINDEL PCB is CHERRYPHILIPYou can find instructions, video tutorials on youtube (key ...
-
iSpndel_4.0
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
New_ISpindel_PCB_3.2 (bugs fixed)
### DESCRIPTIONPCB for PETlng 122mm / d33mm for iSpindel project (electronic Hydrometer)https://gith...
-
BrewPiLess_2.1 - Wemos
### DESCRIPTIONBoard compatible for BrewPiLess controller.You can use Wemos D1mini or LoLin V3 (ver0...
You may also like
-
-
Commodore 64 1541-II 1581 Floppy Disk Drive C64 Power Supply Unit USB-C 5V 12V DIN connector 5.25
442 1 4 -
-
-
-
-
-
-
Modifying a Hotplate to a Reflow Solder Station
1294 1 6 -
MPL3115A2 Barometric Pressure, Altitude, and Temperature Sensor
726 0 1 -
I'm wondering this as well. Thanks
I'm still not clear on this? Should I remove the LED from the Gyro and ESP?
yes, you can remove it
Hmm... this i not clear. You can or you have to ? is it must?` I didnt remove it, never had any issues ? so why ?
Should i remove the led diode because of safety issues?
just use an acrylic pen and paint over the it, you will see a slight glow but this will do no harm
Same here. Please, how did you solve that?
I have the same question. Do you know if it works with LOLIN ? Which is also Wemos D1 Mini :-D
Yes, correct
Which is correct 220 or 230? Thanks
I had the same question. All the iSpindel documentation suggests 220, but you have 230 printed on the board. Do we use 220 or 230?
230K isn't a standard value, you'll have to go to a specialist suppliers if you really want one. Easiest solution is to solder a 220K and 10K in series, bit ugly but it works.
Is it nessesary for it to be 230 or can 220 be used?
Just updating from my experience. I am running just the 220k ohm resistor in that spot and it is working fine. I think that was the intent in the design and just printed wrong on the board.
### TECHNICAL DETAILS / COMPONENTS - 1 Plastic cylinder ( http://www.geoshop.lt/index.php?route=product/product&path=20_26&product_id=285#.WoBTg-jOXIU ) - 1 resistor 4k7ohm - 1 resistor 220kohm - 1 diode BAT43 - 1 Wemos D1 mini v3 (compatible asl v2 or v1 model, but usb is close with the pcb) - 1 Gy-521 Gyro & Acceleration Sensor (MPU-6050 - 1 Temperature Sensor (DS18B20) - 1 TP4056 Lipo Charger micro USB 6 pin with protection circuit - 1 microswitch SK12D07VG3
https://it.aliexpress.com/item/32970643391.html?spm=a2g0s.9042311.0.0.54044c4dMq9Swc
skip, pls
Sorry, I dont understand what you mean ?
I got the same question when I made my order. I told them to plate the slots but I'm not sure if that's the best way or not. My switches seem to work fine. It appears that Filippo?Ceraulo is telling you not to plate them but that's an assumption that I am making. I would like confirmation as well. What is the best way to answer the question, plated or not plated?
- 1 Plastic cylinder ( http://www.geoshop.lt/index.php?route=product/product&path=20_26&product_id=285#.WoBTg-jOXIU ) - 1 resistor 4k7ohm - 1 resistor 220kohm - 1 diode BAT43 - 1 Wemos D1 mini v3 (compatible asl v2 or v1 model, but usb is close with the pcb) - 1 Gy-521 Gyro & Acceleration Sensor (MPU-6050 - 1 Temperature Sensor (DS18B20) - 1 TP4056 Lipo Charger micro USB 6 pin with protection circuit - 1 microswitch SK12D07VG3 ( https://www.pcbway.com/project/shareproject/publish.aspx?orderid=438558 ) Battery Holder: 1043 Keystone or equivalent model (same dimension) link here https://www.aliexpress.com/item/32713751734.html?spm=a2g0s.9042311.0.0.46074c4dQ44qzs
see my assembly video guide.: https://youtu.be/1LlVIHi1B1o
no, BAT43 is mandatory
Battery Holder: 1043 Keystone or equivalent model (same dimension) link here https://www.aliexpress.com/item/32713751734.html?spm=a2g0s.9042311.0.0.46074c4dQ44qzs
board only!