pcb is a handy tool for laying out printed circuit boards. Pcb was first written by Thomas Nau for an Atari ST in 1990 and ported to UNIX and X11 in 1994. It was not intended as a professional layou...
PCBWay
Dec 02,2013
937 views
pcb (software) PCB is an open source software suite for electronic design automation (EDA) - for printed circuit boards (PCB) layout. HistoryPCB was first written by Thomas Nau for an Atari ST in 19...
PCBWay
Dec 02,2013
1065 views
PCBoard PCBoard (PCB) was a bulletin board system (BBS) application first introduced for DOS in 1983 by Clark Development Corporation. Clark Development was founded by Fred Clark. PCBoard was one of ...
PCBWay
Dec 02,2013
1811 views
This simple micro ampere meter circuit can help in measuring small currents in five ranges: from 1 µA to 10 mA. The meter is working in this way: the current being measured Ix shifts the input v...
PCBWay
Dec 02,2013
2909 views
This is a very simple square wave generator circuit built with IC 74LS00 that can generate square signals with frequencies between 20 Hz and 1 MHz. Its stability is good enough for most applications. ...
PCBWay
Dec 02,2013
1215 views
The JFET-input operational amplifiers in the TL07x series are similar to the TL08x series, with low input bias and offset currents and fast slew rate. The low harmonic distortion and low noise make th...
PCBWay
Dec 02,2013
1812 views
When we design for reliability, we usually focus on high-quality components operated conservatively and well within their absolute maximum specs. We expect such designs to become technically obsolete ...
PCBWay
Nov 29,2013
1638 views
I was able to interview a few people from Sunstone about rapid prototyping and the PCB industry for research for my article on perfect prototypes (see Tap New Technologies To Produce Practically Perfe...
PCBWay
Nov 29,2013
861 views
From remote control airplanes to military applications for rockets, CadSoft Eagle PCB design software is used widely among hobbyists and professionals for designing circuits. Since its acquisition by...
PCBWay
Nov 29,2013
879 views
It’s never been more important than in the current economic climate to get products to market with development costs held as low as possible. One of the ways that systems manufacturers can achieve tha...
PCBWay
Nov 29,2013
632 views
The IPC-2581 PCB design-data transfer format strives to be an open format that spans a growing ecosystem of OEMs, EDA vendors, DFM/documentation tools, and CAM/manufacturing providers. The IPC-2581...
PCBWay
Nov 29,2013
855 views
Several browser-based PCB design tools have emerged in the past couple of years, yet the vast majority of designers are still using the same desktop applications that have dominated the EDA industry f...
PCBWay
Nov 29,2013
1537 views
The myriad challenges of designing a chip on its own range from functional correctness to power and signal integrity and manufacturability. Chips do not exist in isolation. Instead, they must be integ...
PCBWay
Nov 29,2013
1820 views
Zuken’s Design Force tool is adept enough to handle design of system-in-package devices with through-silicon-vias on a PCB. System design has long been a highly complex affair, often comprising mul...
PCBWay
Nov 29,2013
1489 views
It is always good to know a bit of PCB terminology. Here is a reference table with the most common words. Bookmark it (Ctrl-D) and use it for when you stumble upon any PCB words that you don’t know...
PCBWay
Nov 29,2013
609 views
A printed circuit board (pcb) mechanically supports and electrically connects electronic components using conductive tracks, pads and other features etched from copper sheets laminated onto a non-cond...
PCBWay
Nov 29,2013
2107 views
To create a PCB design you need to draw the holes, pads and wires you want and send this drawing to a manufacturer. Sounds hard? Don’t worry, there are many free tools out there that will help you do...
PCBWay
Nov 29,2013
1442 views
The impedance of the impedance: the wiring is determined by the copper and the weight of the cross sectional area. L oz copper has, for example, o. 49 m Ω/per unit area of impedance. Capacitance: wi...
PCBWay
Nov 29,2013
573 views
Powering electronic circuits for the first time and realizing that it really works – it’s the best feeling in the world! Nothing else matters, because you just made your circuit work =) This amazing ...
PCBWay
Nov 29,2013
770 views
With ever-changing technology in the world of industrial manufacturing, manufacturers of printed circuit boards are always producing new products, and discontinuing boards that are currently in produc...
PCBWay
Nov 29,2013
661 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 5 |
| 2 | Glodean Florin | 1 |
