GY-NEO6MV2 GPS module
Details
The GPS module with NEO-6M U-Blox chip and external ceramic antenna can be controlled via UART with Arduino and Raspberry Pi after which the position can be retrieved. An LED on the module shows if there is an active connection to a GPS satellite.
The module can also be connected to a PC, notebook, or tablet with a USB to UART converter and can be addressed with the u-center software. It is compatible with various flight control modules that provide GPS computer test software.
Features
3V-5V power supply
Model: GY-GPS6MV2
Module with ceramic antenna, the signal is strong
EEPROM power down Save configuration parameter data
Battery with data backup
With LED signal indicator
Antenna size 25 * 25mm
Module size 25mm * 35mm
Installation aperture 3mm
Default baud rate: 9600
- Comments(0)
Log in to post comments.
You might like
-
-
ESP32-S3 ETH Development Board, 10/100Mbps RJ45 Ethernet port, Wi-Fi & Bluetooth Support, 240MHz Dual Core Processor, ESP32 Ethernet Development Board$16.00 or 1600 BeansRedeem Now -
-
-
-
-
T-CAN485 | ESP32 CAN RS-485 IOT Engineer Control Module Development Board$12.00 or 1200 BeansRedeem Now -
M5Stack Official M5Stack Dial - ESP32-S3 Smart Rotary Knob w/ 1.28" Round Touch Screen$33.00 or 3300 BeansRedeem Now -
-
-
-
-
T-Deck | pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display (White,LoRa 915MHz)$52.00 or 5200 BeansRedeem Now -
-
-
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$2.00 or 200 BeansRedeem Now
