Product Description
I2C IIC Serial 128x64 OLED Display Module
128*64 LED display module for Arduino, supports many control chip. Fully compatible with Arduino, 51 Series, MSP430 Series, STM32 / 2, CSR IC, etc.
Ultra-low power consumption, full screen lit 0.08W
Super high brightness and contrast are adjustable
With embedded driver/controller
Interface type is IIC
Pin Definition: GND, VCC, SCL, SDA
Pins: 4 pins
Voltage: 3V ~ 5V DC
Working Temperature: -30 ℃ ~ 70 ℃
Character Colors: White(as pictures show)
Drive Duty: 1/64 Duty
High resolution: 128 * 64
Panel Dimensions: 26.70* 19.26* 1.85mm/1.03*0.76*0.07 inch(approx)
Active Area: 21.74* 11.2mm /0.86*0.44 inch(approx)
Driver IC: SSD1306
- Comments(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
You might like
-
-20%ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-core Processor, Supports WiFi 6 & Bluetooth, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
ESP32-S3 1.47inch Display Development Board, 172×320, 262K Color, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Colorful RGB LED, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
-11%ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor$32.00 or 3200 BeansRedeem Now
-
ESP32-S3 1.69inch Display Development Board, 240MHz Dual-Core Processor, 240×280 Pixels, Supports WiFi/Bluetooth, Micro LCD Display With ESP32-S3$15.00 or 1500 BeansRedeem Now
-
-
-
-
T-Display S3 AMOLED 2.0 soldered pin | Upgraded from an LCD to an AMOLED display, better color display$30.00 or 3000 BeansRedeem Now
-
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.00 or 5600 BeansRedeem Now
-
-
-19%T-0.85 Inch LCD Module | GC9107 Full Color Display IPS 128*128 Screen Development Board$4.00 or 400 BeansRedeem Now
-
-15%LILYGO T-Display-S3 1.9-inch LCD display development board(Touch Version Non-Soldered Pin)$22.00 or 2200 BeansRedeem Now
-
-3%1.54inch NFC-Powered e-Paper, No Battery, Wireless Powering & Data Transfer$27.00 or 2700 BeansRedeem Now
-
-22%4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer$70.00 or 7000 BeansRedeem Now
-
-
Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless$13.00 or 1300 BeansRedeem Now
-
5.65inch ACeP 7-Color E-Paper E-Ink Raw Display, 600×448, without PCB$46.00 or 4600 BeansRedeem Now
-
-23%2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI$13.00 or 1300 BeansRedeem Now
-
2.9inch Touch E-Paper E-Ink Display HAT for Raspberry Pi, 5-Points Capacitive Touch, 296×128, Black / White, SPI$22.00 or 2200 BeansRedeem Now