JDY-62A 5.0 Bluetooth Stereo Module
Product parameter
Name: Bluetooth 5.0 Stereo Dual Channel Module
Product model: JDY-62A
Bluetooth version: 5.0
Pin spacing: 2.54mm
Number of channels: two channels (stereo)
Power supply voltage: 5V power supply by default (3.7V lithium battery can be supplied by replacing 0R resistor)
Dimensions: 23*15.5*2.4mm (L * W * H)
VCC: The voltage range is 4.2~5V, power supply especially cannot exceed 5v
GND: Power ground
L: Left channel output
R: Right channel output
MUTE: Low level when playing music, and high level when stopping playing
KC: Null pin
FAQ:
Bluetooth cannot be searched
Generally, it is caused by power interference, so filter circuit must be added to the power line.
Bluetooth signal is too weak
Do not wire or copper under the antenna of Bluetooth module, or there is no metal shield around the antenna.
The current is too loud
Generally caused by interference of power supply. It is suggested that the power amplifier wiring should not be too long, and the Bluetooth ground should be separated from the power ground.
Does it support 3.7V power supply?
The module is powered by 5V by default, and the diode on JDY-62 module can be replaced by 0805 package 0R the lead circuit can be used, so that the lithium battery can be used for power supply.
- Comments(0)
You might like
-
-
ESP32-S3 ETH Development Board, 10/100Mbps RJ45 Ethernet port, Wi-Fi & Bluetooth Support, 240MHz Dual Core Processor, ESP32 Ethernet Development Board$16.00 or 1600 BeansRedeem Now
-
-
-
-
-
-
T-CAN485 | ESP32 CAN RS-485 IOT Engineer Control Module Development Board$12.00 or 1200 BeansRedeem Now
-
M5Stack Official M5Stack Dial - ESP32-S3 Smart Rotary Knob w/ 1.28" Round Touch Screen$33.00 or 3300 BeansRedeem Now
-
-
-
-
-
-
T-Deck | pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display (White,LoRa 915MHz)$52.00 or 5200 BeansRedeem Now
-
-
-
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$2.00 or 200 BeansRedeem Now