NRF24L01 2.4GHz Wireless Module
Maximum operating speeds up to 2Mbps, GFSK modulation efficiency, Anti-interference ability, Particularly suitable for industrial control applications.
125 Channels, Multi-point communication and frequency hopping to meet the communication needs
Built-in hardware CRC error detection, Multipoint communication address control.
Low-power 1.9 ~ 3.6V, only 1uA on Power down mode
Built-in 2.4Ghz antenna
Available software to set the address, only received local Address when output data(Provide interrupt instruction), can be directly connected to a variety of microcontrollers, Software programming is very convenient.
Built-in voltage regulator
Standard DIP Pitch Interface for embedded applications
Size: 34mm X 17mm X 1mm
- Comments(0)
You might like
-
ESP32-S3 ETH Development Board, 10/100Mbps RJ45 Ethernet port, Wi-Fi & Bluetooth Support, 240MHz Dual Core Processor, ESP32 Ethernet Development Board$16.00 or 1600 BeansRedeem Now -
-
-
-
-
-
T-CAN485 | ESP32 CAN RS-485 IOT Engineer Control Module Development Board$12.00 or 1200 BeansRedeem Now -
M5Stack Official M5Stack Dial - ESP32-S3 Smart Rotary Knob w/ 1.28" Round Touch Screen$33.00 or 3300 BeansRedeem Now -
-
-
-
-
T-Deck | pocket-sized gadget with a 2.8-inch, 320 x 240 pixel IPS LCD display (White,LoRa 915MHz)$52.00 or 5200 BeansRedeem Now -
-
-
-
PCBWay Wireless Module with SI24R1 RF Communication Wireless Module for Data Transmission$2.00 or 200 BeansRedeem Now
