Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
We use this stencil to apply solder paste to the GBA before mounting the SiPM chip.
Connector board from PCB edge connector to 136 UMC connectors. This is a 6-layer PCB to allow the very densely positioned UMC connectors to be placed in a logic order, on a PCB size that was limited b...
Assembly was done very well!
Stencil to add solder paste to PCB. Works nicely!
Stencil to add solder paste to PCB. Works nicely!
Stencil to add solder paste to PCB. Works nicely!
This thin PCB is a insulating layer for a detector. We received very helpful feedback after the design review and the finished PCBs shipped very quickly, and came out very nice!
This is a very small PCB with a SiPM photo sensor. The PCBs came out very nice and were delivered quickly! We were able to mounts the SiPMs at our lab in a small reflow oven.
Small PCB for single SiPM. PCBs came out nicely!
Field cage PCB for detector. The PCBs look very good!
Small PCB for single SiPM. PCBs came out nicely!
Small PCB for single SiPM. PCBs came out nicely!
Small PCB for single SiPM. PCBs came out nicely!
We needed this PCB to create a mask for detector fabrication. We received very quick and helpful feedback on this design and the finished PCB was shipped very quickly.
1 2