Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
This is our first ESP32-S3 application. It includes CAN (J1939), two A/D channels (voltage input), multiple DAQ inputs tied to 10K Type 2 temp sensors, one on-board temp sensor, one I2C dP sensor tied...
Good quality work. This is our second build
Some beautiful work by PCBway. I've probably ordered with them about a dozen times. They put up with the errors I make sometimes on the BOM and such (I get it fixed for the next order). They are very ...
First PCBA order w PCBway for one of our products. We are building them up (today) into finished assemblies. I tested the first two assemblies (finished) off the mfg line and they were perfect (passed...
150mmx150mm PCBA assembly. Design is a ESP8266 with 120VAC input power. Mfg of the PCB and assembly of the PCBA was absolutely perfect. Combination of SMTP as well as hand placed parts. First time bui...
This was our first build of a STM32 based DAQ board. All attributes and requirements of the board worked perfectly. Thanks to PCBWay for their perfect execution of this build.
We ordered five (5) of the blank PCB boards to review as part of the development of a specialized DAQ board. Everything looked perfect. Delivery from the time of ordering to receipt was about a week. ...
Base PCB for our ESP32-S3 DAQ Board w/ CAN. Beautiful work by PCBway
This is pretty much the final product. PCBWay sources most of the items excluding the LEDS installed in the upper right-hand corner. It is a mix of SMTP parts (mostly) and some hand-soldered parts. I ...
Finished PCBA assembly using STM32 chipset. Flashed six boards this morning and everything was perfect!
DAQ board based on STM32
This design was a PCB and PCBA assembly. Mfg of the PCB was absolutely perfect.
This was our first build of a STM32 based PCB (see PCBA comments). All layers and connections were proper.
Beautiful work on placing all of the parts (mix of SMTP and some hand placed (soldered) connectors, etc
1 2