Custom PCB Requirements for Arcade Stick - Inquiry

Dear PCBWay,

I hope this message finds you well. My name is Ashish, and I serve as the Marketing Manager at GameStoreIndia, an online retailer specializing in Arcade Sticks. I am reaching out to discuss our need for a custom PCB (Printed Circuit Board) to be integrated into our Arcade Sticks.

Below are the specific requirements we have for the PCB:

Dimensions: The PCB should ideally measure either 2"x4" inches or 3"x3" inches.

Compatibility: It should support PS5, PS4, and PC platforms.

Response Time: The response time should be 0.5ms or faster.

Connector Type: A Type C 3.0 connector is preferred for output.

Output Layout: The PCB should feature output sources akin to the Dualsense controller, covering inputs such as D-Pad, Triangle, Square, Cross, Circle, R1, R2, R3, L1, L2, L3, PS, Share, Option, and Touchpad Key. Vibration motors are not required.

Connectors: Two types of connectors are needed for buttons and joystick inputs: a 20-pin connector for compatibility with a 20-pin cable jack, and a screw and hold connector for securing input cables firmly to the PCB.

Branding: Incorporation of the GameStoreIndia logo onto the PCB is essential.

Examples: Attached are some visual references for your consideration.

We believe that meeting these specifications would greatly enhance our product offerings and customer satisfaction. If you have any further questions or require additional details, please don't hesitate to contact us at info@gamestoreindia.com.

Looking forward to your prompt response and potential collaboration.

Warm regards,

Ashish

Marketing Manager

GameStoreIndia

mail: info@gamestoreindia.com

contact/whatsapp: +91 88602 99470