First time client of PCBWay. Good quality and very fast processing. And realistic transport costs
Espectacular como siempre https://youtu.be/pJVH3Gr_MQQ?si=Xyh1qyVNpvsksomX
High quality in the service. Good comunication....
An adapter to make the footpring of a MSGEQ7 equalizer chip into an FFT filter if you are replacing a MSGEQ7 to make your own signal analysis.
An angled power connector adapter for the Commodore 64 to make the power cable not stick out on the side of the computer. A cable is soldered directly to this board.
A breakout board for a stereo 3,5mm audio connector.
This can drive a WMRP or WMRT soldering tools from Weller.
TeensyROM project for use with a Commodore 64. It emulates a lot of things. Uses a Teensy 4.1. https://github.com/SensoriumEmbedded/TeensyROM
Pcb was good
High quality in the service. Good comunication....
Six pogo pins and three locating pins are soldered to this board to make a simple Tag-Connect programming connector.
An angled power connector adapter for the Commodore 64 to make the power cable not stick out on the side of the computer. The original power supply is connected to the female connector on this board.
A breakout board that has input and output and mixes the signal into it to the common output. Many of these can be connected. Used together with the "audio input" and the "audio splitter" boards.
This is a thin probe for a CNC to probe the surface of the workpiece.
This can be filled with a lot of games for the Vectrex and the game to be played can be selected on a OLED display.
This can configure the High Voltage Parallel Programming connector to target specific processors without having to use individual jumper wires.