Digital High-precision Automatic Multimeter

I will start by providing a review for this Digital High-precision Automatic Multimeter. First, let's see an overview of the kit. It can be seen that this kit contains: digital measuring device, test probes, alligator clips, 4 extra fuses of 10A / 250V fuses, plugs, instructions for use. Test probes are very good, thick wires; they have some protective coatings, if we want to perform measurements on electronic boards, they help us to avoid a possible short circuit by touching other components with the probes. Crocodiles are also good; they are mounted at the ends of the probes. In the front of the device we can see all the scales for the values ​​we can measure: voltage, current, resistance, capacity, or we can check continuity, transistors, and much more. We also have a "HOLD" button to keep the device set to a certain measuring range. The screen of the device when it is turned on looks good, depending on the selected range, other meanings appear on the era. After about 5 minutes of non-use, an audible warning sounds, then after a minute the device turns off. If we press the "REL" button for more than 2 seconds, a screen backlight is activated, which is very useful. This backlight also has a self-extinguishing feature, so we don't have to worry about battery consumption. Lights up for about 30 seconds, then turns off the backlight itself. On the back of the device we have some indications, you can see the test probe holders on the cover of the device. The device is powered by a standard 9V battery under the cover on the back of the device. The device, with its cover, weighs a little more than 370 grams. I also did some comparative tests: Let's measure the voltage of a 12V power supply and a 5k potentiometer. I like that the device offers an accuracy with 3 decimals, it is very useful. In conclusion, I like this measuring device, I can measure many parameters with good accuracy.