ESP32-CAM Target Camera

Project: ESP32-CAM Target Camera for Target Shooting PCB Design: Motherboard for the ESP32 Chip to drive LED's and Read a voltage Divider for Battery Capacity A simple PCB design that uses a ESP32-CAM board to drive indicator LED's and also has a voltage divider for reading ADC value of a bank of 4xAA batteries to get the voltage reading so you know what the capacity of the battery is. The PCB design does not use any surface mount components, all the components you can buy off the shelf from any decent electronics store which makes components easier to source and anyone can assemble with a basic soldering iron/equipment! PCB Way Experience: I've previously used electronics engineers to design PCB's for me. It became too expensive, so I taught myself how to use Altium Circuit Maker and designed my own PCB's. The learning curve was steep, but I was able to get the gerber and drill files sorted and submitted. There were problems due to my lack of experience and understanding of the terminology, Chloe and the engineering team at PCB Way guided me through the process, it took a few extra submissions for me to get things right, however without PCB Way's excellent support, I would never have been able to come this far. I'm super happy with the PCB's produced, soldering these up is super easy and the quality is amazing!