ESP32 + 3.5" touch lcd V2

As usually pcb's from PCBway are great and very nice.



Oct 03,2019
416 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Tomi ISP View Profile
6posts 2followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Designed for L-band satellite reception using the designated FR-4 from PCBWay. Manufactured antenna nicely matches the simulated performance!
    Tantalus is a chandelier with 6 articulating tentacles, led MR-16 bulbs at the end of each tentacle. Tantalus uses a Raspberry Pi 5 with a camera and Hailo AI hat to determine what to point the tentac...
    Nixie clock board for use with Z573M tubes. The boards were manufactured in less than 24 hours, perfect in every detail. PCBWay has superior quality and materials, packaged extremely well. This was...
    Very high quality PCB. High-quality and durable soldermask and silkscreen. But I made a minor mistake in the design, so it can only be used after minor modifications.
    Made perfect according to the gerber file, board outlines, pads nice to solder to, holes, shiny black silkscreen. Manufacture and shipping time in 7 days!
    Googol counter will comprise of 11 of these boards and a power and clock board. This is a repeat order for these boards. The quality of these boards is 100% perfect and are manufactured in a very ...
    10x10 cm 100 LED 2835 SMD LED Board. It can be used as a retrofit PCB for light fixtures. It can dissipate approx. 6W of heat (~8-9W total LED power). With high efficiency LEDs you can expect around 1...
    Nice
    SHOW ME MORE