ESP32 based plotter

Splendid quality boards for a very good price. Clean soldermask and traces. Well wetted. And drill dimensions perfectly accurate for the mechanical mounts (the board is also the holder of the servo's and stepper motors). Quick turn-around. Staff fixed/improved a small Gerber error during review with the routing tabs. Smooth process. Delivered well packaged and quickly.

Aug 30,2019
220 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Dirk-WIllem van Gulik View Profile
1posts 0followers 0following
  • Comments(1)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Designed for L-band satellite reception using the designated FR-4 from PCBWay. Manufactured antenna nicely matches the simulated performance!
    Not quite as smooth as my PLA printed parts but useable. Review video can be found here. https://youtu.be/fjRPhw2mm7s
    Tantalus is a chandelier with 6 articulating tentacles, led MR-16 bulbs at the end of each tentacle. Tantalus uses a Raspberry Pi 5 with a camera and Hailo AI hat to determine what to point the tentac...
    Nixie clock board for use with Z573M tubes. The boards were manufactured in less than 24 hours, perfect in every detail. PCBWay has superior quality and materials, packaged extremely well. This was...
    I used PCBWay to create a PCB for an environmental monitoring project with an ESP32. The entire process, from uploading files to setting up production options, was straightforward and user-friendly. ...
    Made perfect according to the gerber file, board outlines, pads nice to solder to, holes, shiny black silkscreen. Manufacture and shipping time in 7 days!
    Googol counter will comprise of 11 of these boards and a power and clock board. This is a repeat order for these boards. The quality of these boards is 100% perfect and are manufactured in a very ...
    10x10 cm 100 LED 2835 SMD LED Board. It can be used as a retrofit PCB for light fixtures. It can dissipate approx. 6W of heat (~8-9W total LED power). With high efficiency LEDs you can expect around 1...
    SHOW ME MORE