techrm level translator

This is a level translator (5V to 3.3V and 3.3V to 5V) to let arduino comunicate with bluetooth module or esp8266



Sep 12,2015
1,349 viewsReport item
PCB
HDI PCB
Assembly
FPC/
Rigid-Flex
X
Choose Num (pcs)
2 Layers
1.6mm
CNC
Machining
Sheet Metal
3D Printing
Injection
Molding
Aluminum
Aluminum
Resin
ABS
Ricardo Medda View Profile
2posts 2followers 0following
  • Comments(0)
  • Likes(0)
You can only upload 1 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000

    You might like

    Very fast and very professional work, I ordered 2024/08/02 and I received 2024/08/12 WOW
    The second PCB is a two-layer design with a thickness of 1 mm, finished with HASL lead-free. This was used for a simpler coil design, intended for lower power applications or scenarios where cost-effe...
    The manufacturing quality is good. I am very satisfied with the PCB quality.
    Parts turned OK, the resin is more flexible so will not break on this delicate part. They were a little warped but that is do to the very small nature of the part design. Here is a youtube video link...
    Small board with a lot of parts to install, part of a modular googol counter I am designing. Once again, outstanding craftsmanship on this board as well as all others I have ordered from PCBWay. Excel...
    This PCB was used for a more complex setup where a thicker and multi-layered design was necessary to enhance performance and reduce losses at higher frequencies. The quality of the PCB was excellent, ...
    I revised my similar design from 2 years ago and made this board. I made a few improvements that made the board more up-to-date and easier to manufacture. I chose a purple color for the PCB because th...
    As usual a very professionnal PCB received 5 days after ordering. Impressive !
    SHOW ME MORE