|
KiCADKicad
|
Atari 2600 Keyboard (synthcart faceplate)
This is a faceplate for the Atari 2600 Keyboard, a recreation of the Atari CX-50 controller with better switches and now you can even get some pretty faceplates for it as well. This reversible faceplate has been designed for use with the synthcart by Paul Slocum - a basic audio synthesizer for the Atari 2600, featuring an argeggiator as well as built-in rhythm patterns (I don't know what that is, but I hope to find out).
For the actual keyboard module, as well as other faceplates that are available - check out the other shared projects relating to this project.
Atari 2600 Keyboard (synthcart faceplate)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(4)
More by Tor-Eirik Bakke Lunde
-
LED Tuning Board
If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
-
BulkyMIDI-32 Extras
BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
-
ZX Interface 2.021
I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
-
MSX Mega Drive Adapter
I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
-
C64 Joystick Adapter (Faceplate)
A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
-
C64 Joystick Adapter
I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
-
CPC464 Joystick Splitter (Faceplate A1)
I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
-
CPC464 Joystick Splitter
Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
-
Apple 2 Prototyping Card (fullsize)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
Apple 2 Prototyping Card (small)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
C64 Pi1541-II Faceplate (variant B)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 JoyKEY (Sega Master System adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 JoyKEY (Atari 7800 adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 Pi1541-II Backplate
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Faceplate (variant A)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Module
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
Arcade 2040
Over the past few years I've been playing around with building new controllers for both modern and v...
-
BulkyModem (Commodore 64/128 UserPort Adapter)
This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
130 0 0 -
DIY Laser Power Meter with Arduino
201 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
176 0 2
