Components
Tools, APP Software Used etc.
|
KiCad 8.0KiCad
|
Description
Tu300LoopDriver.kicad_pcb
The Flesher TU-300 and TU-170A Teletype terminal units have an EIA232 interface and a TTL interface, but do not have a current loop interface. This board provides a floating current loop interface for these terminal units, plugging into the rear panel P2 connector, which is the TTL interface.
Design details are at https://w6iwi.org/rtty/tu300/LoopDriver/ . Further information on the Flesher TU-300 is available at https://w6iwi.org/rtty/tu300/ .
Schematic and Layout
TU300 Loop Driver Schematic
Tu300LoopDriverSchematic.pdf
Dec 11,2024
11 views
Tu300LoopDriver.kicad_pcb
2 Layers PCB 16.95 x 51.84 mm FR-4, 1.6 mm, 1, HASL with lead, Green Solder Mask, White silkscreen
60 mA Teletype loop interface for Flesher TU-170A or TU-300. Loop interface is floating. It keys and samples the 60 mA loop.
11
0
0
Published: Dec 11,2024
Download Gerber file 0
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
File Last Updated: 2024/12/12 (GMT+8)
File update record
2024-12-1205:08:27
Parts List (BOM) is updated.
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Engineer
You may also like
-
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
37 0 1 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
101 0 1 -
Custom Mechanic Keyboard - STM32
132 0 1 -
Radio Frequency Emitter and Reciever Remote with Attiny
108 3 2 -
-
