Components

	200 Ohm SMD 0402 Resistor	x 20
	10 pin 2mm pitch male connector	x 1
	4 pin 2	x 4
	54mm pitch male connector	x 4

Description

Traffic Light LAB for PFx Brick

The board uses a 10 pin 2mm pitch male connector for plugging into a PFx Brick. The traffic lights for Street (4x) and Pedestrian (4x) can be connected to 2,54mm pitch male connectors on the board. Each connector allows to connect LEDs with common Anode line. All SMD Resistors for current limiting are 200 Ohm.

PFx Brick can be found on https://fxbricks.com/pfxbrick/.

More Information about Lightning LEGO? Models can be found on https://brickelectronic.de and in the Book LEGO Modelle beleuchten.

LEGO(R) is a trademark of the LEGO Group of companies which does not sponsor, authorize, or endorse this solution.

Schematic and Layout

https://www.dpunkt.de/buecher/13330/9783864906879-lego%C2%AE-modelle-beleuchten.html

Oct 09,2019

993 views

Traffic Light LAB for PFx Brick

2 Layers PCB 20 x 30 mm FR-4, 1.6 mm, 1, HASL lead free, Green Solder Mask, White silkscreen

This special Light Accessory Board for an PFx Brick make the connection of Traffic Lights for a complete crossing easier.

993

Published: Oct 09,2019

PCBWay Donate 10% cost To Author

Add to cart

*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.

Copy this HTML into your page to embed a link to order this shared project

Copy