Transfer data between the host and various attached devices --- Protocol Droid

Are you an embedded-software developer need to test and improve your projects?

Protocol Droid is exactly what you need. It is an interface adapter board that can communicate with the host over USB and with other devices using I2C, CAN Bus, RS485, UART, or SPI. Or all five at the same time. It make it easier to transfer data between the host and various attached devices. 

A fully customizable software application is also provided, you can send and receive the messages described above; Configure communication settings and the board's two PWM channels; Read values from the board's two ADCs; and Control the board's two DACs etc.

Features & Specifications

• Core Interfaces:

I2C (controller & peripheral modes)

SPI (controller & peripheral modes)

RS485 (controller & peripheral modes)

CANBus/ UART/ PWM/ ADC/ DAC

• Additional Interfaces: JTAG/SWD
• Power Sources: 3 V & 5 V sources with limited current

View the Protocol Droid schematics

Protocol Droid is designed by Yesil Otomasyon, btw it is currently in the crowdfunding stage in CrowdSupply. If you are interested in this interface adapter board, don't hesitate to give your support!