From RS Components: Free from practical constraints on board size, pin counts, layers and output types, DesignSpark PCB circuit design software can be used for schematic capture, PCB design, layout an...
PCBWay
Nov 22,2013
4589 views
Pin-in-paste is the technique of intrusive soldering through-hole components to a circuit board using reflow soldering. Typically, solder paste can be printed and this will provide enough solder for ...
PCBWay
Nov 22,2013
1512 views
The impetus for writing the Patty and the Professor series, in 2009, <posts here> <hardcopy book here> came from my observations that many assemblers were not very focused on productivit...
PCBWay
Nov 22,2013
791 views
Folks, My interest was piqued by a recent article from the pen of good friend, Ray Rasmussen. In this piece, Ray reviews a presentation by Phil Plonski of Prismark Partners on a tear down analysis of...
PCBWay
Nov 22,2013
1317 views
From PCB123: PCB123 provides the complete circuit-board solution, design through order for your PCB prototyping needs. Download the circuit board design software that converts schematic to layout. T...
PCBWay
Nov 22,2013
6399 views
From Advanced Circuits: PCB Artist is a user friendly, fully integrated schematic capture & Free PCB Layout Software that you will find easy to use. You can download PCB Artist and install the p...
PCBWay
Nov 22,2013
4452 views
Free PCB CAD Software The ExpressPCB CAD software is very easy to learn and use. For the first time, designing circuit boards is simple for the beginner and efficient for the professional. Best of all...
PCBWay
Nov 22,2013
10765 views
Asia-made pcbs since 2003. For 11 years, PCBWAY has been committed to meeting the needs of our customers by providing the best and most efficient PCB design experience from quote to delivery. -Hui...
PCBWay
Nov 22,2013
1365 views
DuPont Microcircuit Materials (MCM) has developed a broad and growing portfolio of CB Series screen printed ink materials for rigid and flexible printed circuit boards (PCBs). Current offerings inclu...
PCBWay
Nov 22,2013
1288 views
Stands for "printed circuit board." A PCB is a thin board made of fiberglass, composite epoxy, or other laminate material. Conductive pathways are etched or "printed" onto board, connecting different ...
PCBWay
Nov 22,2013
701 views
A relatively new procedure has been developed to enable a single reflow operation to solder both surface mount and conventional through-hole components on the same board. This is particularly desirabl...
PCBWay
Nov 21,2013
1393 views
There are still components that are not available in surface mount configuration (for example, some connectors and capacitors). Therefore, some assemblies have through-hole and surface mount component...
PCBWay
Nov 21,2013
3658 views
To achieve higher component density, the double-sided assembly technology has evolved. Double-sided circuit boards have copper tracking and component pads (land pattern) on the top and bottom side of...
PCBWay
Nov 21,2013
7264 views
Since the introduction of automated PCB assembly and component lead soldering, wave soldering has been the mainstream method of applying solder automatically to the bottom side of PCBs. Wave soldering...
PCBWay
Nov 21,2013
7939 views
Since the introduction of automated PCB assembly and component lead soldering, wave soldering has been the mainstream method of applying solder automatically to the bottom The PCB is passed though the...
PCBWay
Nov 21,2013
1861 views
Reflow soldering is the making of solder joints by (re) melting previously applied solder, usually in the form of a paste. A re-flow machine is a conveyorised oven that transports the pasted and compo...
PCBWay
Nov 21,2013
693 views
Single sided PCB assembly requires components to be assembled on only one side of the circuit board and is the least complex of PCB surface mount assembly processes. Double sided and variants of surfa...
PCBWay
Nov 21,2013
799 views
To achieve accurate positioning of components, surface mount assembly PCBs must be designed to ensure that component pad (land pattern) dimensions and layout are in accordance with good practice and t...
PCBWay
Nov 21,2013
1537 views
The best-expected manual insertion rate of through-hole components is 200 to 400 components per hour. Automation has been a prime objective for printed circuit board assemblers since the electronics i...
PCBWay
Nov 21,2013
2191 views
Fundamentally, there are two PCB design systems - through hole and surface mount. In through-hole process, components have connecting pins that are pushed through plated holes (vias) in the PCB and pr...
PCBWay
Nov 21,2013
588 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | PCBWay Team | 9 |
| 2 | Peter de Vroomen | 1 |
| 3 | Engineer | 1 |
| 4 | gokul kb | 1 |
