Small holes or sharp edges on the surface of a solder joint generally caused by flux entrapment, oxidation or over-heating.
Shiny Li
Jan 28,2016
1485 views
A depression in the conductive layer that does not penetrate entirely through it.
Shiny Li
Jan 28,2016
1344 views
Chemically-induced fracturing or de-lamination on or below the surface of the base material; it is usually exhibited by a light area around holes, other etched areas or both.
Shiny Li
Jan 28,2016
2061 views
Small imperfection which penetrate entirely through the conductor and/or solder.
Shiny Li
Jan 28,2016
1213 views
A terminal on a component. A component lead that is not readily formable without being damaged.
Shiny Li
Jan 28,2016
1049 views
Pin-in-hole a printed board assembly made up of components with leads which pass through holes in the board and lands. Synonyms: traditional assembly, conventional assembly.
Shiny Li
Jan 28,2016
1062 views
A programmable machine usually with a robot arm for picking components from a feeder. It moves the part for placement and/or insertion to a specific site on the board.
Shiny Li
Jan 28,2016
1008 views
A conductive board layer or artwork image representing a complete conductive layer.
Shiny Li
Jan 28,2016
609 views
A polymer that changes characteristics when exposed to light of a specific frequency.
Shiny Li
Jan 28,2016
780 views
A resist which is not removed after processing, e.g., plating resist used in the fully-additive process.
Shiny Li
Jan 28,2016
639 views
The force per unit width required to peel the conductor or foil from the base material.
Shiny Li
Jan 28,2016
1164 views
The configuration of all conductive and/or non-conductive areas on a PCB. Letters and inscription may also be included. Pattern also denotes the circuit configuration on related tools, drawing and mas...
Shiny Li
Jan 28,2016
619 views
| Ranking | Name | Answers |
|---|---|---|
| 1 | _ Floppy Lab | 4 |
| 2 | PCBWay Team | 3 |
