1.3 Inch OLED Display Module
Product parameter:
Drive chip: SH1106
Support interface: SPI
Resolution: 128× 64
Display size: 1.3 inches
Display color: White light
Overall dimensions: 35.5 x 33.7 x 1.2 (mm)
Glass size: 34.5X23X1.45(mm)
Display area: 29.42 x 14.7 (mm)
Needles: 7
Viewing angle: >160°
Working temperature: -40℃ ~ 80℃
Storage temperature: -45℃ ~ 85℃
Operating voltage: 3.3V/5V
Pin definition:
GND: Logic circuit grounding
VDD: Logic power supply
SCK: Serial clock input
SDA: Serial data input
RST: Reset signal input. When the pin is low, the initialization chip executes. Keep the pin high during normal operation
DC: The data/command control pin. When the pin is pulled high, select the serial interface mode, and the data will be interpreted as data in SDIN. When it is pulled low, the data of SDIN will drop and be transferred to the command register. In I2C mode, this pin acts as a slave address selection
CS: chip selection. Select Chip when CS0 = "L"
- Comments(0)
You might like
-
-20%ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-core Processor, Supports WiFi 6 & Bluetooth, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
ESP32-S3 1.47inch Display Development Board, 172×320, 262K Color, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Colorful RGB LED, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
-11%ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor$32.00 or 3200 BeansRedeem Now
-
ESP32-S3 1.69inch Display Development Board, 240MHz Dual-Core Processor, 240×280 Pixels, Supports WiFi/Bluetooth, Micro LCD Display With ESP32-S3$15.00 or 1500 BeansRedeem Now
-
-
-
-
T-Display S3 AMOLED 2.0 soldered pin | Upgraded from an LCD to an AMOLED display, better color display$30.00 or 3000 BeansRedeem Now
-
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.00 or 5600 BeansRedeem Now
-
-
-19%T-0.85 Inch LCD Module | GC9107 Full Color Display IPS 128*128 Screen Development Board$4.00 or 400 BeansRedeem Now
-
-15%LILYGO T-Display-S3 1.9-inch LCD display development board(Touch Version Non-Soldered Pin)$22.00 or 2200 BeansRedeem Now
-
-3%1.54inch NFC-Powered e-Paper, No Battery, Wireless Powering & Data Transfer$27.00 or 2700 BeansRedeem Now
-
-22%4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer$70.00 or 7000 BeansRedeem Now
-
-
Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless$13.00 or 1300 BeansRedeem Now
-
5.65inch ACeP 7-Color E-Paper E-Ink Raw Display, 600×448, without PCB$46.00 or 4600 BeansRedeem Now
-
-23%2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI$13.00 or 1300 BeansRedeem Now
-
2.9inch Touch E-Paper E-Ink Display HAT for Raspberry Pi, 5-Points Capacitive Touch, 296×128, Black / White, SPI$22.00 or 2200 BeansRedeem Now