2.66inch E-Paper E-Ink Display Module (B), 296×152, Red / Black / White, SPI
Low Power, Wide Viewing Angle, Paper-Like Displaying Without Electricity
Ideal for price tags, shelf labels, industrial instruments...
Features At A Glance
- No backlight, keeps displaying last content for a long time even when power down
- Ultra low power consumption, basically power is only required for refreshing
- SPI interface, for connecting with controller boards like Raspberry Pi/Jetson Nano/Arduino/STM32, etc.
- Onboard voltage translator, compatible with 3.3V / 5V MCUs
- Comes with development resources and manual (driver board circuit diagram, examples for Raspberry Pi/Jetson Nano/Arduino/STM32)
Specifications
- OPERATING VOLTAGE: 3.3V/5V
- DISPLAY COLOR: red, black, white
- INTERFACE: 3-wire SPI, 4-wire SPI
- GREY SCALE: 2
- OUTLINE DIMENSIONS: 37.0 × 83.5mm
- FULL REFRESH TIME: 15s
- DISPLAY SIZE: 30.704 × 60.088 mm
- REFRESH POWER: 16mW(typ.)
- DOT PITCH: 0.202 × 0.203mm
- STANDBY CURRENT: <0.01uA (almost none)
- RESOLUTION: 296 × 152 pixels
- VIEWING ANGLE: >170°
Advantages Of EINK
E-paper display utilizes microcapsule electrophoretic technology for displaying, the principle is: charged particles suspended in clear fluid will move to sides of microcapsule when electric field is applied, making the microcapsule become visible by reflecting ambient light, just as traditional printed paper.
E-paper display will clearly display images/texts under lamplight or natural light, requires no backlight, and features nearly up to 180° viewing angle. It is usually used as e-reader due to its paper-like effect.
Onboard SPI Control Interface
For Connecting With Controller Boards Like Raspberry Pi/Jetson Nano/Arduino/STM32
Onboard Voltage Translator
Compatible With 3.3V / 5V MCUs
Application Examples
Suitable For Price Tags, Asset/Equipment Tags, Shelf Labels, Conference Name Tags...
Outline Dimensions
Resources & Services
WIKI: 2.66inch_e-Paper_Module_(B)
Shipping list:
- 2.66inch e-Paper Module x1
- PH2.0 20cm 8Pin x1
1
2
- Comments(0)
You might like
-
ESP32-C6 1.47inch Display Development Board, 172×320, 262K Color, 160MHz Running Frequency Single-core Processor, Supports WiFi 6 & Bluetooth, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
ESP32-S3 1.47inch Display Development Board, 172×320, 262K Color, Up to 240MHz Frequency, Supports WiFi & Bluetooth, With Colorful RGB LED, ESP32 With Display$12.00 or 1200 BeansRedeem Now
-
-
-
ESP32-S3 4.3inch Capacitive Touch Display Development Board, 800×480, 5-point Touch, 32-bit LX7 Dual-core Processor$32.00 or 3200 BeansRedeem Now
-
ESP32-S3 1.69inch Display Development Board, 240MHz Dual-Core Processor, 240×280 Pixels, Supports WiFi/Bluetooth, Micro LCD Display With ESP32-S3$15.00 or 1500 BeansRedeem Now
-
-
-
-
T-Display S3 AMOLED 2.0 soldered pin | Upgraded from an LCD to an AMOLED display, better color display$30.00 or 3000 BeansRedeem Now
-
LILYGO T4-S3 ESP32-S3 2.41-inch AMOLED Touch Display Development Board RGB Screen Dual-Core LX7 Microprocessor WIFI Bluetooth$56.00 or 5600 BeansRedeem Now
-
-
-19%T-0.85 Inch LCD Module | GC9107 Full Color Display IPS 128*128 Screen Development Board$4.00 or 400 BeansRedeem Now
-
-15%LILYGO T-Display-S3 1.9-inch LCD display development board(Touch Version Non-Soldered Pin)$22.00 or 2200 BeansRedeem Now
-
-3%1.54inch NFC-Powered e-Paper, No Battery, Wireless Powering & Data Transfer$27.00 or 2700 BeansRedeem Now
-
-22%4.2inch NFC-Powered e-Paper Evaluation Kit, Wireless Powering & Data Transfer$70.00 or 7000 BeansRedeem Now
-
-
Universal e-Paper Raw Panel Driver Board, ESP32 WiFi / Bluetooth Wireless$13.00 or 1300 BeansRedeem Now
-
5.65inch ACeP 7-Color E-Paper E-Ink Raw Display, 600×448, without PCB$46.00 or 4600 BeansRedeem Now