Glow tube clock IN12
Name: IN12 Glow Tube Clock
Material: high-end acrylic
product size: 114*46mm
Working voltage: DC 5V(USB-C interface)
Glow tube model: IN12
Part List: Glow clock, remote control, power cord
It is recommended to place it in a place that is not easy for children to touch
Function：
1. time display
Hour, minute and second time display
2. Date display
Year, month and day date display
3. Colorful background breathing light
4. The high-precision clock
Built-in high-precision clock chip, the annual error is less than 1 minute.
5. Power-off memory
Power-off or shutdown does not affect the clock timing, and there is no need to reset the time for power-on or power-on.
6. The infrared remote control
Set by using the matching infrared remote control.
7. Anti-poisoning procedure
When the cathode is lit, some substances will radiate outward and deposit on other unlit cathodes, resulting in the failure of normal glow discharge. Under normal circumstances, if each cathode turns on circularly and the lighting time is similar, the service life of the tube will be longer, so anti-poisoning program is added to turn on circularly at regular intervals to prolong the service life of the glow tube.
8. Low power consumption
A high-efficiency power supply is used, and the power consumption is controlled at 1W.
How to set time:
1. when EQ is pressed, the glow tube at the minute position begins to flash and enters the set time mode.
2. you can change the value by pressing + or -.
3. set the next item by continuing to press EQ. The sequence is minute-hour-day-month-year, and then press EQ to exit the setting mode.
How to set power on/off time:
1. Press button 6, glow tube began to flash, first set is the minute, use + o r-, change the value, and then press 6, for setting hours, set up and then press button 6 can exit the set timing boot mode.
2. Press the button 7, the glow tube began to flash, the first set is the minute, use + o r- ,change the value, then press 7, for setting hours, set up and then press the button 7 can exit the set timing shutdown mode.
3. The default is 00:00, represents the closed timing on/off, so if you want to set 00:00 on/off, please set to 23:59 or 00:01.
How to set ambience lamp brightness and mode：
1. Press the button 9 and the glow tube will start flashing. Use + or - to change the value. 00 is the spectrum cycle mode, 01 is the calling and suction lamp mode, and 02 is the fixed mode. Press the number 9 again and the glow tube on the left will start flashing. Use + or - to change the brightness of the atmosphere lamp. 0 is to turn off the backlight.
2. in non-setup mode, use NEXT to change the color of the bottom ambience light, 255 color versions can be changed using the long press.
Set the anti-poisoning execution interval:
1. Press the key 8 to enter the poisoning prevention execution time interval setting. Press + or - to set it, and then press the key 2 to exit.
- Comments(3)
You might like
-
4-digit 8-segment Display Module for Raspberry Pi Pico, SPI-compatible$4.00 or 400 BeansRedeem Now -
-
-
WS2812 Digital RGB LED Strip, High brightness, Energy-saving And Low power consumption, Cuttable and Programmable$5.00 or 500 BeansRedeem Now -
Electronic Clock for Raspberry Pi Pico, Accurate RTC, Multi Functions, LED Digits$23.00 or 2300 BeansRedeem Now -
RGB Full-Color LED Matrix Panel, 3mm Pitch, 64×32 Pixels, Adjustable Brightness$22.00 or 2200 BeansRedeem Now -
-
-
-16%
-
PWM DC Motor Speed Controller Motor LED Lighting Dimmer Soft Start/Stop 5-30V/12A/360W$6.00 or 600 BeansRedeem Now -
-
8x8 64 LED Matrix WS2812 LED 5050 RGB Full-Color Driver Board For Arduino$7.00 or 700 BeansRedeem Now -
LED aluminum substrate 1w 3w 5w lamp bead universal high power heat sink$0.20 or 20 BeansRedeem Now -
-
Mini Traffic Light 5V LED Display Module Red Green Yellow Light for Arduino Raspberry Pi$1.00 or 100 BeansRedeem Now -
-
Glow tube clock IN12
-17%In Stock
