Romakin Michael's Profile - Engineer - PCBWay Community

Romakin Michael

Recommended

Adapter for AVR Fuse Bit Doctor https://www.pcbway.com/project/shareproject/AVR_Fuse_Bit_Doctor_1.htmlAllows to work with microcontrollers in SOIC-8, SOIC-20, TQFP32 and TQFP44 packages.
Adapter for AVR Fuse Bit Doctor
325403
This PCB for a PG-872 Dual Channel Square Wave Generator (generator designed by Leonid Ivanovich Ridiko)number of output channels 2number of trigger inputs 1number of internal synchronization channels...
PG-872 Dual Channel Square Wave Generator
144800
This version of the fuse bit doctor does not have sockets on the board. All microcontrollers are connected to the board connector through additional adapters. Adapter allows to work with microcontroll...
AVR Fuse Bit Doctor
567413
This is a PCB for simple DDS generator, wich based on development the author under the nickname Integrator. The digital part is implemented on an Atmega8-16AU microcontroller operating at a frequency ...
Simple DDS generator
318414
USB 2.0 microSD/TF card reader. Based on GL827L SD/MMC/MS Flash Card Reader single chip. All SMD components have a size 0603
USB 2.0 microSD/TF card reader
542925
eMMC test board adapter was developed specifically for owners of the Z3X box (for the first revision box), which is used in the repair of mobile phones.Adapter allows to work with eMMC/MCP memory...
EMMC test board adapter for Z3X box (first revision)
60872111
PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips.
PCB ver2.1s for self-manufacturing of a soldering station controller for T12 tips.
9978824
A redesigned Arduino UNO clone PCB takes into consideration using some alternative components like (FT232RL,7805 regulator, ..etc). All smd resistors, capacitors and LEDs are of size 0805.
DIY clone Arduino Uno PCB
93881122
PCB for p-n junction tester. More information here https://www.radiokot.ru/konkursCatDay2017/48/
p-n junction tester
199002
This PCB for a sine wave generator SG-642 (generator designed by Leonid Ivanovich Ridiko). The board has been modified to fit 100x100mm.
SG-642 sine wave generator
272805
______________________________________________Purpose:The DSS-31 oscilloscope is a standalone portable device with a graphic display and microcontroller control, and is designed to study electrical si...
Digital oscilloscope probe DSS-31
7656619
USB 2.0 microSD/TF card reader with micro USB B 5-pin connector. Based on GL827L SD/MMC/MS Flash Card Reader single chip.
USB 2.0 microSD/TF card reader with micro USB B 5-pin
551445

1 2

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on