Paul Versteeg's Profile - Engineer - PCBWay Community

Paul Versteeg

DIY hobbyist that likes to share my designs and findings

Recommended

This is a project to modify a UYUE 946C model hotplate and convert it to a reflow soldering station.The UYUE 946C hotplate is modified by replacing the original controller and by adding an additional ...
Modifying a Hotplate to a Reflow Solder Station
47004
This information can be used to build a LORA-based mailbox receiver and a sender, using the same PCB.Many projects like this use WiFi, but if the distance is beyond that reach, like in an apartment bu...
LORA-based Mailbox alarm
12900
I needed a galvanically separated SPI interface between an ESP32 and an OLED display board.The voltage output of the convertor can be selected by a jumper between 3V3 and 5V for the OLED board.The RST...
SPI bus isolator
15000
This is the Back Plate/Back Panel for a DIY Dynamic Load instrument
DiY Dynamic DC Load - Back Plate (3 of 3)
31100
This is the Face Plate/Front Panel for a DIY DC Dynamic Load instrument
DIY Dynamic DC Load - Face Plate (2 of 3)
33000
This is a DIY Dynamic Load instrument that can do many things professional instruments can do too.It supports CC, CV, CP, CR and a Battery Mode to profile cells.The CC, CV and BT modes are implemented...
DIY Dynamic DC Load (1 of 3)
46640
This is the front panel PCB used for the 10MHz frequency reference.More details can be found on my Blog here:https://www.paulvdiyblogs.net/2023/07/building-10mhz-master-clock.html
10MHz frequency reference 2 of 2
55301
This is part of a 10MHz frequency reference that is based on an OCXO.The project is described in detail on my Blog here:https://www.paulvdiyblogs.net/2023/07/building-10mhz-master-clock.htmlThe close-...
10MHz OCXO frequency reference 1 of 2
126800
This is the front panel for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an output frequency of 10MHz.The design is based on the publication in EEVBlog by Lars Walenius (RIP) but w...
10MHz GPSDO V4.1 (4 of 4)
49900
This is the front panel for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an output frequency of 10MHz.The design is based on the publication in EEVBlog by Lars Walenius (RIP) but w...
10MHz GPSDO V4.1 (3 of 4)
48900
This is the output and interface board for a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an output frequency of 10MHz.The design is based on the publication in EEVBlog by Lars Walen...
10MHZ GPSDO V4.1 (2 of 4)
77701
This is a high precision GPSDO ( GPS (GNSS) Disciplined Oscillator) with an output frequency of 10MHz.The design is based on the publication in EEVBlog by Lars Walenius (RIP) but with several enhancem...
10MHz GPSDO V4.2 (1 of 4)
67000

1 2

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on