Secco41's Profile - Engineer - PCBWay Community

Secco41

Retro lover, engineer and pilot

Recommended

Thanks to cknave for the project, Not tested and I will try and share comments about this project.
C64 Pico Cart
72705
A DIY Guitar Overdrive Pedal PCBThis project is not tested yet, I will test it in a short while, meanwhile if you want to try it at your own risk, just order and share comments.Good luck :)
Guitar Overdrive V1
103912
A simple PCB to connect 3PDT footswitch to your projects. Especially home made DIY guitar pedals.
3PDT Footswitch Connection Board for DIY Guitar Pedals
156508
I built an ESC to try to work for my Quadcopter. I used high power MOSFETs. (80 amps)The PCB is big for easy soldering, testing and debugging.Busy Bee EFM8BB21F16G-QFN20 MCU is used.Try with BLHeli_S ...
ESC for 2-4S batteries, Quadcopters, Cars, Planes, Ships Etc
163024
This is a basic Power Distribution Board for Drones (Quadcopters)You can use it as a bare PCB to connect via XT60 socket to the battery. Use big pads to connect ESCs. There are pads for 8 connections....
Power Distribution Board (PDB) for Drones
403303
This is a tested and working project.Use this board to easily integrate 7 segment displays in your projects. You can use 3 and 4 digit displays (14mm)You can also use 7mm LEDs but you need to bend the...
MAX7219 Driver Board for 7 Segment Display
189602
SwinSID is a microcontroller based clone of the SID, the audio chip used in nearly all 8-bit Commodore computers in the 80'sThe SwinSID clone was designed by Swinkels in 2005, who made different impro...
SwinSID Micro
428226
This is a project by Kim JorgensenDetails can be found on his github page: https://github.com/KimJorgensen/KungFuFlashThanks for this awesome work.Kung Fu Flash can emulate different cartridge types, ...
KungFuFlash Cartridge for Commodore 64
6532731
This project has been developped by TheByteAttic, Thanks for this awesome project,Check his youtube channel and github page for details.This is a small daughter board that fits into the socket of the ...
6502 (W65C02S) to Atari SALLY adapter Board
3800221
This project is tested and runs okay :)This version is only for C64This board is an extended version of my other project here:https://www.pcbway.com/project/shareproject/Playstation_PS2_Dualshock_to_D...
Playstation 2 Dualshock to DB9 Adapter Board (Double Connector)
2436011
This project is tested and works okay!To use it with Arduino Uno, solder male pin headers on the bottom side, to use it with Nano solder the Arduino Nano on the top side.I have made this PCB with the ...
DRAM Test Shield for Arduino Uno and Nano
8704738
A Dennis chip adapter to give your Amiga HDMI output. Check project documentation for details and BOM.Thanks to project owners (c0pperdragon and hoglet67) for this awesome work.This is V2 board
Dennis RGB to HDMI Adapter for Amiga 500 with Raspberry Pi Zero
7412713

1 2

The PCBWay that recognize the talent and effort of the best ELECTRONIC designers in the World.

© COPYRIGHT 2019

About us
Contact us
Follow us on