Description
MAX7219 Driver Board for 7 Segment Display
This is a tested and working project.
Use this board to easily integrate 7 segment displays in your projects. You can use 3 and 4 digit displays (14mm)
You can also use 7mm LEDs but you need to bend the pins.
You can also daisy chain these boards together.
Parts Used
MAX7219 SOIC-24
10uF Cap(4x5.5)
R1 28k (0805)
R2-R3 100ohm (0805)
C1 100nF (0805)
LEDs (0603) Optional
2x5 pin male headers
3-4 digit LED (14mm) Common Cathode
Mar 09,2021
1,761 views
MAX7219 Driver Board for 7 Segment Display
for Common cathode 3-4 digit displays
1761
2
0
Published: Mar 09,2021
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(2)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Secco41
-
C64 Pico Cart
Thanks to cknave for the project, Not tested and I will try and share comments about this project.
-
Guitar Overdrive V1
A DIY Guitar Overdrive Pedal PCBThis project is not tested yet, I will test it in a short while, mea...
-
3PDT Footswitch Connection Board for DIY Guitar Pedals
A simple PCB to connect 3PDT footswitch to your projects. Especially home made DIY guitar pedals.
-
ESC for 2-4S batteries, Quadcopters, Cars, Planes, Ships Etc
I built an ESC to try to work for my Quadcopter. I used high power MOSFETs. (80 amps)The PCB is big ...
-
Power Distribution Board (PDB) for Drones
This is a basic Power Distribution Board for Drones (Quadcopters)You can use it as a bare PCB to con...
-
MAX7219 Driver Board for 7 Segment Display
This is a tested and working project.Use this board to easily integrate 7 segment displays in your p...
-
SwinSID Micro
SwinSID is a microcontroller based clone of the SID, the audio chip used in nearly all 8-bit Commodo...
-
KungFuFlash Cartridge for Commodore 64
This is a project by Kim JorgensenDetails can be found on his github page: https://github.com/KimJor...
-
6502 (W65C02S) to Atari SALLY adapter Board
This project has been developped by TheByteAttic, Thanks for this awesome project,Check his youtube ...
-
Playstation 2 Dualshock to DB9 Adapter Board (Double Connector)
This project is tested and runs okay :)This version is only for C64This board is an extended version...
-
DRAM Test Shield for Arduino Uno and Nano
This project is tested and works okay!To use it with Arduino Uno, solder male pin headers on the bot...
-
Dennis RGB to HDMI Adapter for Amiga 500 with Raspberry Pi Zero
A Dennis chip adapter to give your Amiga HDMI output. Check project documentation for details and BO...
-
GVP-Compatible 64-Pin 4MB SIMM
GVP-Compatible 64-Pin 4MB SIMM PCB for GVP Accelerator Cards,Made by: Tube TimePlease check the site...
-
Amiga 500 Kickstart EPROM Adapter for Rev 5 Boards
You can use your burned EPROM chips (27C400 and 27800) with your Amiga 500 Rev5 boards.Bill of Mater...
-
Playstation PS2 Dualshock to DB9 (DSUB 9) Adapter for Commodore, Amiga and Atari Computers
Use Arduino pro mini to connect your Playstation 2 Dualshock to your retro computers. Like Commodore...
You may also like
