Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
This was my first SMT-based project, so I ordered a stencil. It turned out perfectly and was just what I needed to cleanly assemble the board.
This was a shared project, and it turned out perfectly. The shared project system is fantastic!
This board provides a regulated supply for the screen grids of a pentode array (used as the pass element for a linear regulator circuit), as well as the main regulator circuit itself (a Maida-type cir...
This board is the power supply board for a high-voltage regulated bench power supply. PCBWay executed the board perfectly. The only mistake was my own -- I used a too-small footprint for a through-h...
As always, the boards turned out perfectly. Thanks!
Boards turned out perfectly!
Board turned out well. Due to the tight spacing of the through-holes for the flying leads on this type of tube, I was concerned about manufacturing tolerances (lead diameter is 0.5mm, and I specified...
Boards turned out perfectly. I ordered with an SMT stencil and it turned out perfectly, as well!
Another quality fabrication from PCBWay! I will be making this a shared project for others!
This board provides a current-limited bias voltage supply for the DUT. PCBWay executed the board perfectly. The only mistake was my own -- did not intend to use PTH mounting holes, oops!
Boards turned out perfectly.
Boards turned out perfectly!
Blue mask boards turned out nicely, and were completed more quickly than expected!
Board turned out perfectly.
1 2