Recommended
Shared Projects Questions Sponsorships Feedback Blog Like
Cover for a USB to radio audio modem for digital transmission. Top quality PCB fabrication, as always. I have used PCBWay many times and perfect service every time. Super easy to use Web interface to ...
This PCB adapts from a 24 pin Centronics connector to a 4p4c modular connector and fits inside a plastic backshell. I have used PCBWay for years with many different designs and have always been very i...
Custom backshell for Centronics 24p connector adapter to 4p4c modular connector. Used in the San Diego Model Railroad museum in Balboa Park. Excellent quality 3D printing. Much better than I can achie...
I used a bunch of milled slots and rows of drilled holes to make the masts break out. PCBway did an outstanding job on this board. Much better than I thought. I used 0.8 mm board material and still th...
We have over 700 track turnout switches scattered over 4,000 square feet of exhibit space at the San Diego Model Railroad Museum. At many places we use 12VDC relays to control power to the track. With...
Our model railroad in the San Diego Model Railroad Museum is one of the biggest in the world. This circuit board controls the signals that control train movement and feed information about train locat...
Converts 14 VAC to 12 VDC for model railroad switch motor relays. Always the best quality and quick turnaround. I have had PCBWay make dozens of PCBs for the San Diego Model Railroad Museum and every...
Interface between computer USB and radio audio for digital transmission. Top quality PCB fabrication, as always. I have used PCBWay many times and perfect service every time. Super easy to use Web int...
Custom backshell for Centronics 24p connector adapter to 4p4c modular connector. Used in the San Diego Model Railroad museum in Balboa Park. Excellent quality 3D printing. Much better than I can achie...
Signal masts for model railroad. Very detailed routing required. Second order. As always, perfectly executed. Very high quality.
Simple board, but many large holes. Defined them in the dimensions file and they came out beautifully. Nice, clean, accurate holes for mounting components. Silk screen printing was very sharp. I need ...
We use several Raspberry Pi computers to serve Web pages and drive display monitors in the San Diego Model Railroad Museum. Power the exhibit is turned off every night, which risks scrambling the SD c...
Simple H-bridge DCC bus driver with RJ45 breakout connectors. Useful for large model railroad layout to provide enough drive to many track boosters. We use PCBWay exclusively for our circuit boards, a...
This is a breakout board for an STM32F411 microcontroller module that could be programmed as an Arduino or use the STM32Cube IDE (far better!) with ports for eight I2C buses and an RS422/RS485 interfa...
1 2