RedFish shields are a simple way to add multi factor authentication (MFA) or passwordless login when using PCs and/or online services.Top quality!
A board for DIYers. For experiments with Arduino. Ok.
The board was made perfectly, especially for a small board of 26mmx28mm. All traces connected perfectly and the silkscreen was nice and crisp.
PCBWay made exactly what we designed. The boards are easy to solder to. See https://github.com/RCMgames/RCM-hardware-D1 for more info and more photos
Very happy with the result. Although the file is designed for ABS plastic, the sintered version is very close to the FDM object. The post-processing was done quickly.
Thank you good work PCBWAY
As always wonderful service. Project descript_ion here http://engredu.com/2024/06/27/charge-pump/
The piece I ordered was designed around a Kobalt air compressor hose coupler, to replace the sleeve that you press down in order to release the hose that's connected to the coupler. The people here at...
Some time ago I had found some old UAA180s mounted on a Breadboard that I had forgotten I had, so I decided to try to make a simple PCB. I designed it using the free program KiCAD, installed the plu...
Made perfectly, I am completely satisfied with the quality. Thank you. I will order more.
Excellent quality. One of the PCBs had damage to the silkscreen and underlying solder mask, but a resolution was reached satisfactorily. I will continue to do business with PCBWay.
Very nice. This is a Stainless Steel part with a set of 19 12.5mm long, 1.6mm diameter holes. The holes were pretty well resolved and all of them connect through the 90 degree bend. I think they could...
Easy to chose what you want and need for your specific project. The tolerances given to PCBWay were all on point (within +-0.01mm). Shipping was fast and without any problems or delays.
This is truly amazing but the printing got a bit offset at some point. Still the part is usable as is
The part was very well produced, up to spec in terms of tolerances, and exactly as ordered. The surface finish was high-quality with only a scratch or two, almost all of them imperceptible at that any...
You can find the project's descript_ion here: https://hackaday.io/project/197057-an-hp-16c-or-a-baldurs-gate-3-macro-pad-yes 1) Ease of transaction. It couldn't have been easier to get this done...
1 ... 13 14 15 16 17 18 19 20 21 22 23 ...