Great quality. No chips or cracks, only a few visible layer waviness. This could be sanded and polished away if need be. No complaints.
Not quite as smooth as my PLA printed parts but useable. Review video can be found here. https://youtu.be/fjRPhw2mm7s
Tantalus is a chandelier with 6 articulating tentacles, led MR-16 bulbs at the end of each tentacle. Tantalus uses a Raspberry Pi 5 with a camera and Hailo AI hat to determine what to point the tentac...
Nixie clock board for use with Z573M tubes. The boards were manufactured in less than 24 hours, perfect in every detail. PCBWay has superior quality and materials, packaged extremely well. This was...
Very high quality PCB. High-quality and durable soldermask and silkscreen. But I made a minor mistake in the design, so it can only be used after minor modifications.
Another excellent PCB from PCBWay.com. Prompt fabrication and delivery. PCBWay make my electronics workflow a pleasure.
I thought it would be hard to print because it was so small, but it printed well.
Simple PCB for creating your own Flipper Add-On.All PCBs are produced very well.
I used PCBWay to create a PCB for an environmental monitoring project with an ESP32. The entire process, from uploading files to setting up production options, was straightforward and user-friendly. ...
Made perfect according to the gerber file, board outlines, pads nice to solder to, holes, shiny black silkscreen. Manufacture and shipping time in 7 days!
Googol counter will comprise of 11 of these boards and a power and clock board. This is a repeat order for these boards. The quality of these boards is 100% perfect and are manufactured in a very ...
10x10 cm 100 LED 2835 SMD LED Board. It can be used as a retrofit PCB for light fixtures. It can dissipate approx. 6W of heat (~8-9W total LED power). With high efficiency LEDs you can expect around 1...
Nice
The thickness is very thin, so I changed the material several times. I was worried that it would be wrong, but it was printed without any problems.
This are case replacement for the Flipper Zero.All Cases where perfectly produced.
For a diy project I needed this oversized PCB to mount 19 potentiometers, an Arduino, a Mux , 2 leds, a button and a midi-female-port (Midi Out). In classic PCBway style the PCB and the Silkscreen cam...
1 2 3 4 5 6 7 8 9 10 11 ...