|
|
el357 |
x 14 | |
|
|
arduino nano |
x 1 | |
|
|
ras-1210 |
x 2 | |
|
|
220uf capacitor |
x 6 | |
|
|
10K 0402 Resistor |
x 16 | |
|
|
1K 0402 Resistor |
x 12 | |
|
|
185E 0402 Resistor |
x 2 | |
|
|
Aluminium electrolitic capacitor 1uf |
x 1 | |
|
|
DB107S |
x 1 | |
|
|
Transformer to 12Vac 1 |
x 1 | |
|
|
2Amps |
x 1 | |
|
|
Tblock-I3 |
x 4 | |
|
|
Tblock-I2 |
x 2 |
2 water pump automatic controller
This project was created to fully automatize a building where there are 2 trifasic pumps switched by a contactor, in the building they have tested a lot of systems but none of them cover the requirements, this one is controlled by arduino which makes the programing easier for everyone to cover specific needs, it is designed to work with ac voltage at the probes so there is no electrolisis erotion on the probes, and it has 1 ref and 3 sensor levels for both recieving water tank and the elevated water tank
2 water pump automatic controller
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(1)
More by CARLOS ARTURO HERNANDEZ
-
1/2 oz dispenser
This dispenser was created as a school project to dose te exact same amount every time its needed, f...
-
Nano Leaf Flex Linker DOWNLOAD THE GERBERS DO NOT PURCHASE DIRECTLY!
NanoLeaf LinkerFLEXIBLE Replacement Linkers for Nanoleaf Light Panels (NL22 or NL28 models).they mus...
-
NanoLeaf Linker
Replacement Rigid Linkers for Nanoleaf Light Panels (NL22 or NL28 models).they must be done in a 0.8...
-
2 water pump automatic controller
This project was created to fully automatize a building where there are 2 trifasic pumps switched by...
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
113 0 0 -
DIY Laser Power Meter with Arduino
163 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
156 0 2 -
A DIY Soldering Station Perfect for Learning (Floppy Soldering Station 3.0)
563 0 2
