ELLER LAB - BENJAMIN SMITH
UNITED STATES OF AMERICA • + Follow
Description
4x1 27A LED Mux
This board allows for switching between multiple high current LEDs such as the CBT-90 LEDs. It also switches the thermistor channels, and runs the fans in parallel.
This board is designed to interface with the following LED driver: https://github.com/Llamero/Four_Channel_MHz_LED_Driver
Schematic and Layout
KiCAD Github Repository
https://github.com/Llamero/High-current-4x1-LED-mux
Nov 12,2021
826 views
4x1 27A LED Mux
2 Layers PCB 117 x 127.1 mm FR-4, 1.6 mm, 2, HASL with lead, Blue Solder Mask, White silkscreen
Allows rapid switching between high current LEDs.
826
0
0
Published: Nov 12,2021
Download Gerber file 5
BOM(Bill of materials)
PCBWay Donate 10% cost To Author
Only PCB
PCB+Assembly
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
Topic
- Comments(0)
- Likes(0)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by ELLER LAB - BENJAMIN SMITH
-
30 mm Cage Plate LED Driver
Description:This board is an entirely self-contained LED and driver circuitry designed to be compati...
-
4x1 27A LED Mux
This board allows for switching between multiple high current LEDs such as the CBT-90 LEDs. It also ...
-
Raspberry Pi GPIO Hat with Aperture for Overclock Cooling
### DESCRIPTIONThis is a Raspberry Pi hat that allows the GPIO pins to be directly interfaced with a...
-
Arduino Shield - High Power LED MHz Modulator
### DESCRIPTIONThis is an Arduino shield that is designed to drive an LED at 4.2V/800mA max. It'...
You may also like
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
129 0 0 -
DIY Laser Power Meter with Arduino
197 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
174 0 2
