Tor-Eirik Bakke Lunde
NORWAY • + Follow
Tools, APP Software Used etc.
|
KiCADKicad
|
Description
BulkyMIDI-32 ExModule (Panel)
Adds extra functionality to the BulkyMIDI-32 ExModule, giving you the opportunity to mount the interface components such as switches and LEDs here instead of directly on the module. While a cheaper version of the completed module can be built without by installing replacement components there, installing them here allows you to build a far more attractive device.
Check out related shared projects for a list of all projects related to the ExModule.
Code
https://github.com/tebl/BulkyMIDI-32
Schematic and Layout
https://github.com/tebl/BulkyMIDI-32/tree/main/documentation/schematic
May 29,2024
200 views
BulkyMIDI-32 ExModule (Panel)
2 Layers PCB 23.2 x 100 mm FR-4, 1.6 mm, 1, HASL with lead, Black Solder Mask, White silkscreen
Adds a front facing panel for mounting switches and LEDs to the BulkyMIDI-32 ExModule.
200
1
0
Published: May 29,2024
Download Gerber file 0
PCBWay Donate 10% cost To Author
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
Under the
Attribution-ShareAlike (CC BY-SA)
License.
- Comments(0)
- Likes(1)
Upload photo
You can only upload 5 files in total. Each file cannot exceed 2MB. Supports JPG, JPEG, GIF, PNG, BMP
0 / 10000
More by Tor-Eirik Bakke Lunde
-
LED Tuning Board
If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
-
BulkyMIDI-32 Extras
BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
-
ZX Interface 2.021
I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
-
MSX Mega Drive Adapter
I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
-
C64 Joystick Adapter (Faceplate)
A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
-
C64 Joystick Adapter
I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
-
CPC464 Joystick Splitter (Faceplate A1)
I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
-
CPC464 Joystick Splitter
Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
-
Apple 2 Prototyping Card (fullsize)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
Apple 2 Prototyping Card (small)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
C64 Pi1541-II Faceplate (variant B)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 JoyKEY (Sega Master System adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 JoyKEY (Atari 7800 adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 Pi1541-II Backplate
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Faceplate (variant A)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Module
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
Arcade 2040
Over the past few years I've been playing around with building new controllers for both modern and v...
-
BulkyModem (Commodore 64/128 UserPort Adapter)
This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
You may also like
-
-
-
-
kmMiniSchield MIDI I/O - IN/OUT/THROUGH MIDI extension for kmMidiMini
137 0 0 -
DIY Laser Power Meter with Arduino
212 0 2 -
-
Box & Bolt, 3D Printed Cardboard Crafting Tools
186 0 2
