BulkyModem (Faceplate FA1)
It's a faceplate for my BulkyModem, it is mounted on the top of the unit in order to give it a nice looking finish. An extra copy of this PCB can also be installed on the bottom, it'll avoid any shorting against the bottom of the device though you will prefer one of the longer options for the front faceplates. As for this specific design it is just a faceplate, check out the related shared projects for the remaining modules that are needed in order to build it up. The faceplate is compatible with both the BulkyModem as well as the later added BulkyModem-32.
Check out related shared projects for a list of all projects related to the BulkyModem.
BulkyModem (Faceplate FA1)
*PCBWay community is a sharing platform. We are not responsible for any design issues and parameter issues (board thickness, surface finish, etc.) you choose.
- Comments(0)
- Likes(0)
More by Tor-Eirik Bakke Lunde
-
LED Tuning Board
If you were to take a look at my shared projects, you'll find that for someone who doesn't actually ...
-
BulkyMIDI-32 Extras
BulkyMIDI-32 is based on the mt32-pi project, bringing you the all the auditory excellence that was ...
-
ZX Interface 2.021
I've grown fond of cartridge formats in my later years, mostly because of the feeling you get by bro...
-
MSX Mega Drive Adapter
I've been playing around with my MSX computer recently, and as the computer itself supports a two bu...
-
C64 Joystick Adapter (Faceplate)
A rather stylish looking faceplate to go with the C64 Joystick Adapter, it covers up most of the ele...
-
C64 Joystick Adapter
I recently bought a Raspberry Pi for use with emulators on modern systems, and so I wanted an easy w...
-
CPC464 Joystick Splitter (Faceplate A1)
I made a simple joystick splitter for the Amstrad CPC 464 on a simple PCB, so I thought - why not ma...
-
CPC464 Joystick Splitter
Simple passive device that breaks out the joystick port on the Amstrad CPC 464 computer so that two ...
-
Apple 2 Prototyping Card (fullsize)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
Apple 2 Prototyping Card (small)
I wanted to learn more about the cards used with the Apple 2 computers, so I started the task of see...
-
C64 Pi1541-II Faceplate (variant B)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 JoyKEY (Sega Master System adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 JoyKEY (Atari 7800 adapter)
With the C64 JoyKEY I wanted to build a simple joystick, but given how well it worked I wanted it to...
-
C64 Pi1541-II Backplate
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Faceplate (variant A)
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
C64 Pi1541-II Module
The Commodore 64 was central to many a young boys childhood, especially those older than 30! Still, ...
-
Arcade 2040
Over the past few years I've been playing around with building new controllers for both modern and v...
-
BulkyModem (Commodore 64/128 UserPort Adapter)
This is an adapter for hooking up your BulkyModem or BulkyModem-32 to your Commodore 64/128. It take...
-
-
-
3D printed Enclosure Backplate for Riden RD60xx power supplies
84 1 1 -
-
-
-
Sega Master System RGB Encoder Switcher Z80 QSB v1.2
73 0 0 -
18650 2S2P Battery Charger, Protection and 5V Output Board
110 0 0 -
High Precision Thermal Imager + Infrared Thermometer | OpenTemp
536 0 7 -
Sony PlayStation Multi Output Frequency Oscillator (MOFO) v1
151 0 2 -
